Chapter B: Assembly And Setup - Star Trac 4500 Owner's Manual

Assembly and Setup
This chapter details how to assemble and set up your STAR TRAC4500 TREADMILL-
Please begin by verifying that the following parts were included in your shipment:
Description Qty.
Frame Assembly w/ Motor Shroud.1
Top Rail with Display.1
Front Rail.2
Side Rail w/ Display Cable.1
Side Rail.1
Screw, Button Head Socket Cap, l/4"-28 UNF
x
3/8" *.8
Bolt, Hex-head, 5/16"-18 UNC x 6"t.2
Washer, Flat, 9/16" I.D. x 1-3/8" O.D.f.2
Washer, Flat, 5/15" Standard!.2
Hex (Allen) key, 5/64"!.1
Hex (Allen) key, 1/8"!.1
Hex (alien) key, 3/32"!.1
Hex (Allen) key, 5/32"!.1
Hex (Allen) key, 1/4"!.1
Bungee cord, 28"!.1
Screwdriver, Phillips, #2!.1
Screwdriver (blade-tip), 3/32"!.1
Wrench, Combo, 9/16" & 7/8"!.1
Tie, Strap, Mount!.1
Tie strap, 3-1/2"!.1
Owner's Manual with Warranty Registration Card.1
Should any component not be present or if you have any operational questions, please call Star
Trac's Service department at (800) 503-1221 or USA 1-714-669-1660. Specifically refer to
your treadmill serial number and model number listed below:
Serial No._
Model No._
*Pre-inserted into handrails and connecting tubes (stubs)
tPre-inserted into frame rails
tPart of included STAR TRAC tool kit.
STAR TRAC 4500TREADMILL Owner's Manual