Table of Contents
Advertisement
1. Auto Head Cleaner Assembly (Fig. B-1)
(Optional Item)
1) Remove the Cleaner Arm Assembly (Auto Head Cleaner
Assembly) by pushing the Locking Tab {B) outward
2) Remove the Cleaner Upper Spring and then remove the
Cleaner Upper Arm Sub Assembly
3)
Remove the Cleaner Spring
* NOTE
1) When reassembling, do not touch the Video Head Tip with
fingers or tools
=
CLEANER UPPER ARM
SUB ASSEMBLY
CLEANER UPPER SPRING
CLEANER ARM
CLEANER SPRING
=
OPA a
ees.
SENSI
jess
g OSM
BSy,
SB
Fig. B-1 Auto Head Cleaner Assembly
2. Drum Assembly and Drum Base(Fig. B-2)
1
2
~—
Remove the Auto Head Cleaner Assembly (Option)
Unplug the connector with the Deck Mechanism Assem-
bly turned over
3) Loosen the screw(A) and then lift up the Drum Brush
4) Remove two screws(B) and then lift up the Drum Assem-
bly and Drum Base from
the Deck Mechanism Assem-
bly
Separate the Drum Assembly from the Drum Base by Loos-
ening three screws(C) on the back of Drum Base
* NOTE
1) When disassembling and reassembling
@ Do not touch the Video Head tip with fingers or tools
(Give special attention to disassembling and reassembl-
ing of Auto Head Cleaner Assembly)
@® After reinstalling the Drum Brush, the Drum Brush should
be aligned
with
the center of vertical axis
of Drum
Assembly
@ After completing the reassembly, adjust the transporta-
tion system and the Servo P G
—
o
KV-20/13VM30/31
RM-Y138/"
SCREWIA}
ORUM
ASSEMBLY
a
DRUM BASE
Fig. B-2 Drum Assembly/Drum Base
3. Drum Assembly
3-1. Drum Sub and Motor Assembly (Fig. B-3-1)
: New Type (No two screws and P.C.B on the Drum)
1) Remove the Drum Base from the Deck Mechanism Assembly
2) Separate the Drum Assembly from the Drum Base
3) Remove two screws(A) and then remove the rotor
4) Remove three screws(B) and then remove the stator
DRUM
SUB ASSEMBLY
MOTOR
ASSEMBLY
SCREW(A)
Fig. B-3-1 Drum Sub and Motor Assembly
* NOTE
1) When disassembling and reassembling
@ Do not touch the Video Head Tip with fingers or tools.
~
69
-
Advertisement
Table of Contents
