Table of Contents
Advertisement
-
PI -
1-12. USING THE TIMER-ACTIVATED FUNCTIONS
le = SI
©OoTU
e aa EY
[+20
RM-Y138/W
* The clock cannot be set automatically if
you don't receive a channel that carnes a
time signal in your area. If so, set the
clock manually (pp28-29).
* tf there are only a few channels in your
area that carry time signals, setting the
clock automatically may take up to about
30 minutes. If nothing happens even after
you wait about 30 minutes, set the clock
manually.
¢ The menu disappears automatically if you
don't proceed for more than one minute.
Setting the Clock - AUTO CLOCK SET
Before you use the timer feature for recording program, you need to set the current
time and date.
Some TV and cable channels have started to transmit time signals with their broadcasts.
Your VIDEO TV can pick up this time signal to automatically set the clock. After
completing the steps below, when you tum off the VIDEO TV, it will automatically search
for a channel that caries a time signal and set the clock. The Auto Clock Set feature
only works if a channel in your area 1s broadcasting a time signal. If broadcasters in your
area are not yet sending time signals, set the time manually (PP28 - 29).
Clock setting is necessarry also to use ON/OFF TIMER, CHANNEL BLOCK, Timer
Recording and VCR Plus Recording.
Press MENU.
MENU
The main menu appears.
> VIDEO
SETUP
MENU
CAPTION VISION
NOISE REDUCTION : OFF
TRACKING
'SET VCR Plus+ CHANNELS
LANGUAGEADIOMA
Uso
> Gay
Exit Gey)
2
in main menu, press A+ or V- to select SET UP
Then press RETURN.
SET UP
The SET UP screen appears.
> TIMER
'TAPE REMAIN:T-120
(A)
RETURN
'AUTO REPEAT : OFF
CABLE : OFF
AUTO PROGRAM
EK
CHANNEL ERASE/ADD
DMENU
a)
Use ¢
Exit
Press A+ or V- to select TIMER.
Press RETURN.
TIMER
The TIMER screen appears.
> CURRENT TIME
®
RETURN
ON/OFF TIMER
CHANNEL BLOCK
DMENU
Press A+ or V- to select CURRENT TIME.
Press RETURN.
The CURRENT TIME screen appears.
(A)
RETURN
ne
th
Press RETURN then select AUTO by using A+ or V7-
Press RETURN again.
The Auto Clock Set screen appears.
RETURN
(R)
(ze
Use $ Guay Exit (Hau)
CURRENT TIME
> AUTO
MANUAL
> MENU
CURRENT TIME
» FULL AUTO
OPTIONS
> MENU
Use $ FEU
Exit Gg
25
Preface
26
+)2J9©
© © OF
CTH}20
OOO
Bren,
Bes
RM-Y138/W
Preface
Press RETURN then select FULL AUTO by using A+ or V7-
Press RETURN again.
RETURN
K 6%
When clock data service
is available,
the clock 1s set auto-
matically
with leaving the TV off
7
To activate the Auto Clock Set function, turn the TV off.
The VIDEO TV automatically sets the clock.
The VIDEO TV automatically searches for a channel that carnes a time signal
and sets your time zone and daylight saving time (if applicable). If your clock
sets, but displays the wrong time zone or daylight saving time, you can adjust
these settings by following the steps below.
If the clock is not activated
1
Follow steps 1 to 5 above.
Press RETURN then select OPTIONS by using A+ or V-
Press RETURN again.
CURRENT TIME SET CH
Db AUTO MANUAL
The CURRENT TIME SET CH screen appears.
RETURN
K (KA
(cH-~]
3
Press RETURN, then press A+ or V'- to select AUTO or MANUAL.
CURRENT TIME SET CH
» AUTO
MANUAL
(CH---]
if you select AUTO:
The VIDEO TV automatically searches
for a channel that carries a time
signal.
Use
Exit
If you select MANUAL.
Set a channel that carries a time
CURRENT
TIME SET CH
signal using the number buttons.
> AUTO MANUAL
Use this option
if you know
that
[CH--}
channel. Most PBS member stations
broadcast
a time signal. For the
fastest response, set the VIDEO TV to
your local PBS station.
Push 0-9 keys to set
CURRENT TIME for clock
Then push RETURN
Use > Reity
Exit [EM
Advertisement
Table of Contents
