Sony TRINITRON KV-13VM30 Service Manual page 26

- 9% -
TIMER RECORDING
8 Press RETURN to change the recording speed position in red then A+ or V-
until EP appears.
RETURN (R} (zC
wo 3
The AT (AUTO SPEED) mode starts recording at the SP speed, but if it determines there isn't
enough tape left to complete the programmed recording, it switches to the EP speed.
TIMER SET/CHECK 1/6 SAT
DATE START STOP CH
wroweD 9:00PM 10:55PM 25EP
Use = Gem Exit
9 Press RETURN to store the setting. TIMER SET/CHECK 1/6 SAT
DATE START STOP CH
> 1MOweD 9:00PM 10:55PM 2GEP
RETURN
Hen te AGS Ce
Use ¢ Geum Exit few
1 After you finish programming, press POWER to turn off the VIDEO TV.
The TIMER REC indicator lights.
To change or correct the setting before completing it
Press BACK SPACE to return to the item to be changed.
To preset another program
Move the cursor to the second line after step 9 and repeat steps 2 to 10.
Daily/Weekly Recording
You can preset the timer-activated recording to the same program everyday of the
week (Daily recording), or one day of the week(Weekly recording).
Follow steps 1 through 2 in "Setting the Timer" on page 47.
You can select the following programs.
Each time you press V-, the indication under "DATE" on screen changes in the
following order.
EVERY SUN SUN - SAT (Everyday of the week)
EVERY MON
'
MON - SAT (Everyday except Sunday)
MON - FRI (Everyday except
Saturday and Sunday)
EVERY SAT
The following messages under each case
appear on the screen:
« "PLEASE PUT IN A RECORDABLE
CASSETTE" ---
PLEASE PUT IN A RECORDABLE
CASSETTE
When switched to stand-by mode for timer
recording, if a cassette 1s not inserted or a
cassette without safety tab is inserted.
* "PLEASE PUSH POWER OFF TO SET
TIMER' ---
When the VIDEO TV ts still turned on
before the timer recording starts or when
SLEEP OFF time and TIMER REC
START overlap.
¢ "PLEASE STOP THE TAPE"--
When TIMER ON SCREEN ts pressed at
the same time the tape is being played
back.
* "VCR IS RECORDING'---
When PLAY, FAST FORWARD, REWIND
/REVIEW, EJECT, CH +/-, 0~9 buttons,
INPUT SELECT, JUMP or MENU 1s
pressed at the same time the timer
recording 1s being done.
* "TIMER REC STARTS IN 5 MINUTES" ---
5 minutes before timer recording starts.
¢ "PLEASE SET THE CLOCK FIRST"---
When TIMER ON SCREEN Js pressed in
the condition the current time is not set.
* "VCR is TIMER RECORDING'---
When STOP button is pressed during
recording.
The recording Is not stopped.
* To stop the Timer Recording
1. Press TIMER ON SCREEN
TIMER SET/CHECK screen appears.
2. Press A+ or V- to select TIMER REC
PROGRAM.
3. Press CLEAR
The program ts cleared and the timer
recording stops.
49
Preface
ROOOCLE
[+20
(T}1O © © © Uh
RM-Y138/W
50
Preface
hen Preset Timer Recordings O re)
LEE AEEET
If the turn-on time of two programs are the same
The program listed first on the TIMER SET/CHECK display has priority over the
other programs. The timer recording of lower priority programs will be done from the
point after program 1 ts finished.
Program 1
(listed first in the fist)
10:00pm. 10:50pm
Program 2
listed next in the list) >|
Will not be recorded
11:30pm
i
if the recording start time of program 2 is the same as the recording end time
of program 1
Program 1 -_———>
10:00pm 10:50pm
Program 2
14:40pm.
— ————_—_———————————————————— —
{f the recording start time of program 2 comes before recording of program 1
Is over
The recording of program 2 will begin after program 1 Is finished.
Program 1 ———— | 11:30pm,
10:00pm
Program 2 >}
10:45pm L eee
Will not be recorded
If a power interruption occurs
* If a power interruption lasting less than approximately three hours occurs while the VCR 1s
waiting for the preset time, the VIDEO TV re-enter the timer recording standby mode.
* If a power interruption lasting more than approximately three hours occurs before a timer
recording, the memory clears. Reset the date and time for timer recording.
* if a power interruption tasting less than approximately three hours occurs during a timer
recording, the VIDEO TV starts recording again.
If the recording start time of the program Is same as the time set with ON/OFF TIMER
(pp.30-32)
* The ON/OFF TIMER has priority over the timer recording so that the timer recording will not
start. In this case, set the recording start time earlier than ON/OFF TIMER and the timer
recording will start.