Sony TRINITRON KV-13VM30 Service Manual page 63

BRACKET ASSEMBLY (L)
SPRING (L)
GEAR (L)
SWITCH SPRING
SWITCH LEVER
SHAFT D
Fig. A-9-1 Drive Gear Assembly
* NOTE
1) When reassembling, seat the projections of Gear R in the
holes of Gear C when the projection of Gear R is aligned
with the hole of Gear C and then keep the Gear C turned
in the clockwise direction
9-6. Gear R(Fig. A-9-1)
1) Lift up the Gear R from the Shaft
9-7. Spring R(Fig. A-9-2)
1) Remove the Spring R by releasing Hooks
* NOTE
1) When reassembling, be certain Spring R in the part(A) of
Gear R
9-8. Gear L.(Fig. A-9-1)
1) Remove the Gear L from the shaft
9-9. Spring L (Fig. A-9-2)
1) Remove the Spring L by releasing Hooks from the Gear
Li
* NOTE: (Refer to the Spring R Section)
9-10. Switch Lever(Fig. A-9-1)
1) Remove the Switch Lever from the shaft
- 67 -
KV-20/13VM30/31
RM-Y138/W
BRACKET ASSEMBLY(R)
GEAR R
GEAR C
SPRING CC
CAP D
SPRING CUSHION
SPRING R
SPRING R
Fig. A-9-2 Spring R