Example Of Connecting To - Panasonic PT-LC75U Operating Instructions Manual

Example of connecting to computer
Computer
Monitor
Computer for g
control use
D-sub 9-pin
(male)
Computer
NOTE:
€ It is better to shut down the computer before turning off the MAIN POWER
switch of the projector.
® Refer to the list of compatible signals on page 52 for the types of RGB
signals which can be input to the projector by connecting a computer.
è Do not input the signal to the RGB2 IN/RGB1 OUT connector when the
RGB2 SELECT item in the OPTION1 menu is set to OUTPUT. (Refer to
page 36.)
21
Prep