Advertisement
|
| |
:
{
|
a
4
|
INSTRUCTIONS FOR USE
Press POWER / STANDBY to switch on the receiver.
2 Turn SOURCE SELECTOR to select a source.
~»The name of the source is displayed.
© You can select the FRONT AV / GAME input by pressing
FRONT AV (FR 975 only).
3 Start playback of the source as usual.
¢ Turn VOLUME to adjust the volume.
—»i'/CLUME and the volume level between 0 and SZ is
displayed.
1 Press BASS or TREBLE.
~ BASS or TREBLE and the actual value are displayed
briefly. Then TURN JOLUME KNOB
TQ CHANGE is
scrolled.
2 Turn VOLUME to adjust the bass or treble.
~»HASS ar TREBLE and the actual value are displayed.
Note: If VOLUME is not turned within 5 seconds or if any
other contro! is used, the bass or treble adjustment is
switched off.
© |f a subwoofer is connected, press SUBW. ON/OFF to
increase the bass performance.
Nate: In case of digital surround sound, a subwoofer signal
will only be available when supported by the source
matertal.
© Press LOUDNESS to switch loudness either on or off.
~—»> LOUDNESS is displayed if loudness is on.
PLAYBACK, RECORDING
if you wish to record from a source you must select it with
SOURCE SELECTOR. The incoming signal is reproduced by all
audio and — if the source includes a video signal — video
outputs of the receiver. The sound settings do not affect the
recording.
2 Prepare the desired recording appliance. It must be
connected to one of the outputs of the receiver.
3 Start recording on the recording appliance.
4 Start the playback of the source as usual.
Notes: — The audio and video signal of VCR IN is not
reproduced by VCR OUT. The same applies to the
audio signal of CDR/TAPE IN to CDR/TAPE OUT.
— We recommend not to use the digital output
COAX OUT of the receiver to record from an
analogue source. Use the analogue output
CDR/TAPE instead.
— From a source which is connected to the
6 CHANNEL / DVD INPUT audio input cannot be
recorded.
Advertisement
