Graco GM 5000 Instructions-Parts List Manual page 15

Airless paint sprayer

Hide thumbs Also See for GM 5000:

L W &

NOTE The engine must be removed before the Field,

Clamp or Clutch Housing can be removed.

1. Working under the mounting plate (A) of the Cart, re-

move the screw (1

3 ,

lockwasher

(80)

and washer

(99)

which hold the clutch housing (2) to the cart. See Fig

2. Stillworkingunderthemounting plate, removethetwo

nuts

(61) and lockwashers

(9),

and then puli the

screws (14) out of the base of the engine. Disconnect

the red wire from the engine lead

(e).

Dlsconnect the

black and white wires from the field. Pull the wires

carefully through the grommets (66) before removing

the engine. See Fig 29-1 and

29-2.

3. Lifl the engine carefully and place

it on a work bench.

Remove the Fleld and Wlrlng Harness, Clamp and

Clutch Housing, as instructed on pages 30 and

31.

Skip ahead to Reassembly, page 32, Step

NOTE All selvice to the engine must be performed by an

29-1.

Flg

29-2

authorized HONDA dealer.

Table of Contents

220-886 231-052