Onkyo TX-8511 Instruction Manual page 26

Multi-Room Remote Control
Refer to pages 24 and 25 for connection details.
indicator off
MA OFF
SPEAKERS B
VOLUME
Remote control
TUNER PHONO ¢D
VIDEO-1 VIDEO-2
Remote control
a
Ly
C_]
vy
26
REMOTE CONTROLLER pc.12is.
In the main room:
1. Press the MR OFF button on the TX-8511 to make the indi-
cator go off. (If the MR OFF indicator is lit, the multi-room
system cannot be used.)
2. Press the SPEAKERS B button to illuminate the SPEAK-
ERS B indicator.
3. Turn the VOLUME knob to its minimum.
In the sub-room, direct the remote control toward the Remote
Sensor (Onkyo multi-room system) and:
4. Press the appropriate INPUT SELECTOR button on the
remote control to select your desired source and start oper-
ating it.
5. Use the VOLUME A or Y¥ button to adjust the volume to
the desired level.
If the remote control is used from the sub-room, but the compo-
nents cannot be controlled, check the following:
e@ Use the controls on the TX-8511 in the main room to check
whether it is working properly. Then, use the remote control to
check whether the component is working properly. If it is not,
refer to page 6.
e@ When operating a component not bearing Onkyo's RI jack,
check that the emitter is directed toward that component.
e@ Check that the components are correctly connected.
e Check that the MR OFF indicator on the TX-8511 ts not lit.