Onkyo TX-8511 Instruction Manual page 19

Receiving RDS (Only for European and some other models)
DISPLAY
SCAN PTY/TP
—« DOWN TUNING UP >
OISPLAY
%
EF C Character or Program
i aa Service Name
Radio Text
1. Press the PTY/TP button, and the program type of the cur-
rently selected station will be shown on the display (for
example, "SPORT"').
If the station you are receiving is not broadcasting RDS, "NOT
RDS" (this is not an RDS station) will be shown on the display.
2. Use the TUNING UP/DOWN buttons to select another pro-
gram type (PTY) (for example, "ROCK M"').
See the PTY descriptions on the previous page.
3. Press the SCAN button to start searching for the chosen
PTY station.
When a station is received with the desired PTY, the scanning
stops for approximately 5 seconds, before the unit starts scan-
ning again.
4. When the desired station is reached, press SCAN button
again to stop scanning.
If the station you are listening to is not an RDS station, this func-
tion cannot be used.
1. Press the PTY/TP button until "TP" appears on the dis-
play.
If x 7 Px is shown on the display, it indicates that the current
station is broadcasting traffic information.
2. Press the SCAN button to start searching for a TP station.
When the unit receives a TP station, it stops scanning.
If the unit cannot receive any signal, "NOT FIND" (cannot find
the station) is shown on the display.
If the station you are listening to is not an RDS station, this func-
tion cannot be used.
1. Each time you press the DISPLAY button, the display
changes as shown in the left.
If the current station you are listening to is not an RDS station,
only the frequency of the station or the station name, if you have
entered it (see page 20) appears. (If there have been no characters
entered, only the frequency is shown.)
When RT is received, it can sometimes take between a few seconds
and 15 seconds (more or less) to show RT on the display.
Sometimes the following messages will be shown on the display.
WATT: indicates that it requires more time to receive the RT
information. When the information is received, the characters will
scroll across the display.
NO TEXT: this appears for 3 seconds and indicates that even
though an RDS station is being received, there is no RT informa-
tion included.
19