BenQ Gaming X300G User Manual page 92

You may be required to provide proof of purchase documentation to
verify that you are an authorized user of the projector.
Changing the password
1. Go to the Advanced menu - System > Security Settings. Press OK. The
Security Settings page appears.
2. Highlight Change Password and press OK.
3. Enter the old password.
• If the password is correct, another message Input New Password
appears.
• If the password is incorrect, the password error message will
appear, and the message Input Current Password will follow for your
retry. You can press BACK/
password.
4. Enter a new password.
5. Confirm the new password by re-entering the new password.
Disabling the password function
1. Go to the Advanced menu - System > Security Settings >
Power On Lock, and press OK and / to select Off. The message
Input Password appears.
2. Enter the current password.
• If the password is correct, the OSD menu returns to the
Security Settings page. You will not have to enter the password next
time turning on the projector.
• If the password is incorrect, the password error message will appear,
and the message Input Password will follow for your retry. You can
press BACK/
Note
Though the password function is disabled, you need to keep the old password in hand should you
ever need to re-activate the password function by entering the old password.
Tip
To secure the projector settings from being changed accidentally, you can lock the control keys on
the projector. See
to cancel the change or try another password.
"Panel Key Lock" on page
to cancel the change or try another
72.
92