The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any...
Page 2
Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.com...
The SPLIT-DPDL-4A 4 Port DisplayPort Splitter has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the SPLIT-DPDL-4A should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT. THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. www.avenview.com Page 2...
INTRODUCTION The Avenview SPLIT-DPDL-4A 4 port splitter has the ability to duplicate a single DP (DisplayPort) source to any four DP screen /display. This unit also has two useful features – supports resolutions up to 2560x1600 and extends PCM 7.1 audio to the supported DP screens/displays attached.
PACKAGE CONTENTS Before you start the installation of the HDMI Extender, please check the package contents. SPLIT-DPDL-4A POWER ADAPTER 5V/3A USER’S MANUAL BEFORE INSTALLATION • Put the product in a level and stable location. If the product falls, it may cause damage or malfunction to components within the casing.
CABLE SPECIFICATION We highly recommend achieving best results with our SPLIT-DPDL-4A you acquire a high quality 26 or 24 AWG HDMI cable with the below specifications to maintain signal integrity and distances. UltraAV DisplayPort to DisplayPort Version 1.1a Cable The DisplayPort cable is fully compliant to DPCP (DisplayPort Content Protection) ensuring full compatibility and successful transmission of all audio and video content.
PANEL DESCRIPTION 2.5.1 INPUT PANEL (SPLIT-DPDL-4A) Back Panel EDID: EDID switch INT/EXT: This switch allows user to select the built-in EDID (INT) or the display’s EDID (EXT). Note: When the EDID switch is on EXT, the unit will detect Output 1’sdisplay EDID and record in the unit.
INSTALLATION (SPLIT-DPDL-4A) To setup Avenview SPLIT-DPDL-4A please follow these steps for connecting to a device: 1. Power off sources such as using DP graphic card, Laptop Mac etc. 2. Connect DisplayPort video Source to the INPUT- upto 2560x1600 3. Connect DisplayPort cable to DisplayPort Displays 4.
SECTION 7: SPECIFICATIONS SPECIFICATIONS Item Description UNITS SPLIT-DPDL-4A UNIT DESCRIPTION 1X4 DP splitter with PCM audio support DP COMPLIANCE DPCP Compliant VIDEO BANDWIDTH 10.8Gbps (4lanes at 2.7Gbps) 2560X1600 DEEP COLOR 12BIT VIDEO SUPPORTED SEE ALSO Section 3 DISPLAY PORTCABLE WQXGA: (2560X1600) ~ IN 5m(16ft) OUT 10m(33ft) AUDIO SUPPORT PCM 7.1(32-192kHz Fs sample rate)
Page 13
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
Page 14
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the SPLIT-DPDL-4A and is the answer not in the manual?
Questions and answers