Table of Contents
Advertisement
Quick Links
4 Port 3G/HD/SD-SDI
Splitter/DA with Reclocking
User's Guide
Model #: SPLIT-3GHDSDI-4RS
© 2013 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview
makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability
whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right. Reproduction of this manual, or parts thereof, in any form, without the
express written permission of Avenview Inc. is strictly
prohibited.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Avenview SPLIT-3GHDSDI-4RS
Summary of Contents for Avenview SPLIT-3GHDSDI-4RS
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
-
Page 2: Table Of Contents
REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ..4 INTRODUCTION ......................... 5 FEATURES ..........................5 PACKAGE CONTENTS ......................5 BEFORE INSTALLATION ..................... 6 SECTION 2: SPLIT-3GHDSDI-4RS ....................... 6 PANEL DESCRIPTION ......................6 INSTALLATION ........................7 SECTION 3: SPECIFICATIONS ......................8 SECTION 4: SIGNAL MEASUREMENTS .................... 10 www.avenview.com... -
Page 3: Section 1: Getting Started
Removal, installation, and set-up service charges. SAFETY INSTRUCTIONS 4 Port 3G/3G/HD/SD-SDI Splitter with Reclocking The SPLIT-3GHDSDI-4RS, have been tested for conformance to safety regulations and requirements, and have been certified for international use. However, like all electronic equipments, the SPLIT-3GHDSDI-4RSshould be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT. THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. www.avenview.com Page|4... -
Page 5: Introduction
NTRODUCTION The Avenview SPLIT-3GHDSDI-4RSreceives one SDI input, perfectly duplicates it, and re-transmits four SDI outputs for real time multi-viewing. It is a reliable video device splitting a SDI, HD-SDI or 3G-SDI video source to four SDI compliant displays at the same time. -
Page 6: Before Installation
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the coaxial cable. It can cause malfunction. SECTION 2: SPLIT-3GHDSDI-4RS PANEL DESCRIPTION FRONT PANEL 1. 3G/3G/HD/SD-SDI Input 2. LED – Reserved 3. -
Page 7: Installation
INSTALLATION Follow these instructions for installation of SPLIT-3GHDSDI-4RS: 1. Ensure SPLIT-3GHDSDI-4RSand all other source devices are turned off 2. Connect a camera or other 3G/HD/SD-SDI device to Input of SPLIT-3G4HDSDI-4RS 3. Connect devices equipped with 3G/HD/SD-SDI inputs (e.g. monitors or video processors) to SPLIT-3GHDSDI-4RSoutputs 4. -
Page 8: Section 3: Specifications
SECTION 3: SPECIFICATIONS ITEM DESCRIPTION MODEL SPLIT-3GHDSDI-4RS SDI STANDARDS SD/HD/3G-SDI AUTO 3G/HD/SD-SDI DETECTION SUPPORTED PROTOCOLS SMPTE 259M, SMPTE 292M, SMPTE 424M, SMPTE425M VIDEO BANDWIDTH [2.97Gpbs & 2.97/1.001Gbps] DATA RATES 270 / 1483 / 1485 / 2970 Mbps [HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30 SUPPORTED VIDEO [SD] NTSC@59.94Hz, PAL@50Hz... - Page 9 SIGNAL MEASUREMENTS RESULTS WAS TESTED BY TEKTRONIX MEASUREMENT DEVICE USING BELBEN 1694A HD/SDI 18 AWG LOW LOSS RG-6/U TYPE, 18 AWG SOLID .040" BARE COPPER SERIES DIGITAL COAX CABLE. CONDUCTOR, GAS-INJECTED FOAM HDPE INSULATION, DUOFOIL® +TINNED COPPER BRAID SHIELD (95% COVERAGE), PVC JACKET www.avenview.com Page|9...
-
Page 10: Section 4: Signal Measurements
SECTION 4: SIGNAL MEASUREMENTS www.avenview.com Page|10... - Page 11 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview...
Need help?
Do you have a question about the SPLIT-3GHDSDI-4RS and is the answer not in the manual?
Questions and answers