Avenview SW-HVD-HDMA-4X1 User Manual
  1. Manuals
  2. Brands
  3. Avenview Manuals
  4. Media Converter
  5. SW-HVD-HDMA-4X1
  6. User manual

Avenview SW-HVD-HDMA-4X1 User Manual

Multi-input scaler to hdmi with ir, rs 232 and audio support
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WQXGA
2560x1600
© 2015 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Control Your Video
Multi-Input Scaler to HDMI with IR,
RS 232 and Audio Support
VIDEO WALLS
VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS
SPLITTERS
CABLES & ACCESSORIES
Model #: SW-HVD-HDMA-4X1
WIRELESS
Rev. 7.15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SW-HVD-HDMA-4X1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Avenview SW-HVD-HDMA-4X1

Summary of Contents for Avenview SW-HVD-HDMA-4X1

  • Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any express or implied warranty, relating to its products are is strictly prohibited.

  • Page 2: Table Of Contents

    4.2. INPUT PANEL (REAR) ....................9 4.3. REMOTE CONTROL ....................10 INSTALLATION (SW-HDM-HDMA-4X1) ..............10 5. RS-232 Protocols ......................11 6. Supported Input Resolutions..................... 15 7. Supported Output Resolutions..................17 GENERAL TROUBLESHOOTING .................. 18 SECTION 9: SPECIFICATIONS ......................19 Page|2 www.avenview.com...

  • Page 3: Section 1: Getting Started

    Removal, installation, and set-up service charges. SAFETY INSTRUCTIONS The SW-HVD-HDMA-4X1 Presentation Scaler has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the SW- HVD-HDMA-4X1 should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

  • Page 4: Regulatory Notices Federal Communications Commission (Fcc)

    DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT. THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. Page|4 www.avenview.com...

  • Page 5: Introduction

    INTRODUCTION The Avenview SW-HVD-HDMA-4X1 enables users to switch between 4 different Video/Audio sources to a single HDMI equipped display. This reliable scaler/switcher is the perfect solution for combining and scaling Digital or Analog video sources (RGB/YPbPr/YCbCr) with your digital HDMI® display, with this scaler/switcher the cost of upgrading individual components (i.e.

  • Page 6: Before Installation

    Do not twist or pull by force the ends of the HDMI/UTP cable. It can cause malfunction. CABLE SPECIFICATIONS To achieve best results with our SW-HVD-HDMA-4X1 we highly recommend a high quality 26 or 24 AWG HDMI cable with the below specifications to maintain signal integrity and distances.

  • Page 7: Application Diagram

    APPLICATION DIAGRAM Page|7 www.avenview.com...

  • Page 8: Panel Description

    PANEL DESCRIPTION 4.1 INPUT PANEL (SW-HVD-HDMA-4X1) Front Panel SERVICE: Manufacturer use only. RS232: Connect to a PC or RS-232 control system with a D-sub 9-pin cable for RS-232 control. HDMI 1/2 IN: Connect to the HDMI source DisplayPort IN: Connect to a DisplayPort source devices such as a DVD player or a Set-top Box device such as a PC/Laptop with a DisplayPort cable.

  • Page 9: Input Panel (Rear)

    4.2 INPUT PANEL (SW-HVD-HDMA-4X1) Rear Panel MINUS (-)/IN: When in the OSD menu, press this MENU/ENTER: Press this button to ENTER the On- button repeatedly to move down through the menu. screen Display (OSD) menu. Press again to confirm the When not in the OSD menu, press this button to selection.

  • Page 10: 4.3 Remote Control

    3. Connect an HDMI cable to HDMI supported Display. 3. Connect an Audio source (if required) to Audio OUT or Optical OUT. 4. Plug in 5V/2.6 DC power adapter to the screw terminal of SW-HVD-HDMA-4X1 Power LED illuminate 5. Power on all 4 Sources and HDMI Display 7.

  • Page 11: Rs-232 Protocols

    RS-232 Protocols SCALER REMOTE CONTROL Definition Definition ► ◄ Baud Rate: 19200 bps Data Bit: 8 bits Parity: None Stop Bit: 1 bit Flow Control: None RS-232 Commands COMMAND DESCRIPTION POWER ? Power Status POWER ON Power On POWER OFF Power Off 3D ? 3D Status...
  • Page 12 COMMAND DESCRIPTION HDMI 2 Video Input in HDMI2 Video Input in DisplayPort Video Input in PC COMP Video Input in Component AUDIO ? Audio Input Source AUDIO Audio Input in AUDIO OPTICAL Audio Input in OPTICAL HDMI/DP Audio Input in HDMI/DP MUTE ON Mute On MUTE OFF...
  • Page 13 COMMAND DESCRIPTION FEEDBACK OFF RS232 Feedback Disable STATE ? Video Input Signal Status VERSION ? Firmware Version DEFAULT Reset to Factory Default Note: Any commands will not be executed unless followed by a carriage return. Commands are not case-sensitive. OSD Menu FIRST LEVEL SECOND LEVEL THIRD LEVEL...
  • Page 14 640×480 800×600 1024×768 1280×1024 1600×1200 1920×1200 By Native 3D Bypass Exit Output Format 3D→2D 3D Bypass Exit Miscellany EDID Mode Internal External Exit Info. OSD Mode Exit About SW-HVD-HDMA-4X1 FW Ver. Factory Reset System Reset Exit Exit Page|14 www.av enview.com...

  • Page 15: Supported Input Resolutions

    Supported Input Resolutions INPUT RESOLUTION (2D SIGNAL) HDMI COMP 640×350@85   640×400@85   720×400@85   640×480 (VGA)@60, 72, 75, 85    800×600 (SVGA)@56, 60, 72,    75, 85, 120 848×480@60Hz   1024×768 (XGA)@60, 75, 85, 120 ...
  • Page 16 INPUT RESOLUTION (2D SIGNAL) HDMI COMP 1792×1366@60, 75  1856×1392@60  1920×1080@60   1920×1200@60RB, 60, 75   1920×1440@60  720×480i/p    720×576i/p   720i/p@50, 60   1080i/p@50, 60   1080p@24  2048×1152@60RB  2560×1600@60RB ...

  • Page 17: Supported Output Resolutions

    Supported Output Resolutions OUTPUT RESOLUTION (2D SIGNAL) 640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1200RB, 480p, 720p, 1080p OUTPUT RESOLUTION (3D SIGNAL) Frame Packing 720p@50/60, 1080i@60, 1080p@24/30 Top-and-Bottom 720p@50/60, 1080i@60, 1080p@24/30 Side-by-Side 720p@50/60, 1080i@60, 1080p@24 Note: Some displays may not support 3D@50 Hz and therefore, some 3D 50Hz signal may not be displayed.

  • Page 18: General Troubleshooting

    (sink end), the clock rate, frame compare, video pattern, audio, EDID and HDCP with Quantum 780 (recommended) Passive monitoring enables an integrator to view the HDCP transactions, EDID exchange, as well as the connection events Passive Monitoring: between the actual devices in the network. Page|18 www.avenview.com...

  • Page 19: Section 9: Specifications

    SECTION 9: SPECIFICATIONS SPECIFICATION ITEM SW-HVD-HDMA-4X1 Model Multi-Input Scaller to HDMI with IR Rs232 and Audio Support Model Description (2560x1600) DisplayPort Supported Resolution Input 2 x HDMI,DisplayPort,VGA/Component 3.5mm /Optical Audio Output HDMI and 3.5mm /Optical Audio 255MHz/6.75Gbps HDMI Video Bandwidth DisplayPort Bandwidth 2.7Gbps &...
  • Page 20 5. Because the quality of the category cables has the major effects in how long transmission distance will be made and how good is the received display, the actual transmission length is subject to your category cables. For resolution greater than 1080i or 1280x1024, a solid CAT6 cable is the only viable choice. Page|20 www.avenview.com...
  • Page 21 NOTES...

  • Page 22: Technical Support

    Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.

Table of Contents