1. Manuals
  2. Brands
  3. Sinoboom Manuals
  4. Lifting Systems
  5. TB24 Plus
  6. Operation manual

Sinoboom TB24 Plus Operation Manual

Hide thumbs Also See for TB24 Plus:
Table of Contents

Advertisement

Quick Links

Download this manual
Part No.505064100002
Rev: B
Jun 2022
Operation
Manual
产品说明书
PRODU
C T MAN U AL
TB24 Plus/TB800 Plus
TB26J Plus/TB860J Plus
0608E (2132E)
G T JZ
0808E (2732E)
G T JZ
0808E (2732E)
G T JZ
G T JZ
0808E (2732E)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TB24 Plus and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sinoboom TB24 Plus

Summary of Contents for Sinoboom TB24 Plus

  • Page 1 Operation Part No.505064100002 Rev: B Manual Jun 2022 产品说明书 PRODU C T MAN U AL TB24 Plus/TB800 Plus TB26J Plus/TB860J Plus 0608E (2132E) G T JZ 0808E (2732E) G T JZ 0808E (2732E) G T JZ G T JZ 0808E (2732E)
  • Page 3 Operating, servicing and maintaining this vehicle or equipment can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or equipment in a well-ventilated area and wear gloves or wash your...
  • Page 4 : No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China Zip Code : 410600 Copyright © Hunan Sinoboom Intelligent Equipment Co., Ltd. All Rights Reserved The final interpretation right of this manual belongs to Hunan Sinoboom Intelligent Equipment Co., Ltd.
  • Page 5 See the nameplate on your machine to identify the model and serial number. (See Decals/Nameplate Inspection of the Operation Manual for details.) Trade Identification Model Serial No. Imperial Metric From 0505100100 to present TB24 Plus TB24 Plus TB800 Plus From 0506400160 to present TB26J Plus TB26J Plus TB860J Plus NOTE: •...
  • Page 6 This Page Intentionally Left Blank...
  • Page 7 This manual covers the basic parts information of one or more products. Therefore, please use this manual according to your needs. If you find problems in the manual or have suggestions for improve- ment, feel free to share your feedback with Sinoboom, and we will address these issues as soon as possible.
  • Page 8 This Page Intentionally Left Blank...

  • Page 9: Table Of Contents

    ..... . 5-5 Decals/Nameplates (CE-Metric) . . .10-5 Inspecting the Battery ....5-6 TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 10 Plus ......10-17 Appendix 1: Symbols and Description....... A-1 Appendix 2: Prepare the Work Record Before Delivery ..A-3 Appendix 3: Repair & Inspection Report ......A-5 © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 11: Introduction

    The owner or administrator of the machine shall also provide the manufacturer’s maintenance information to the person responsible for maintaining the machine. If you have any questions, contact Hunan Sinoboom In- telligent Equipment Co., Ltd.. TB24 Plus&26J Plus Operation Manual...
  • Page 12 This Page Intentionally Left Blank © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 13: Machine Specifications

    MACHINE SPECIFICATIONS Table 1-1 TB24 Plus specifications TB24 Plus (METRIC) TB800 Plus (IMPERIAL) MEASURE DIMENSION Max platform height 24.4m 80ft 0.6in Max working height 26.4m 86ft 7in Max horizontal reach (restricted/ 18.43m/20.74m 60ft 5.6in/68ft 0.5in unrestricted) Overall length (stowed) 11.55m...
  • Page 14 MACHINE SPECIFICATIONS Table 1-1 TB24 Plus specifications (continued) TB24 Plus (METRIC) TB800 Plus (IMPERIAL) MEASURE Turntable tail-swing 4ft 9in 1.45m Max allowable inclination 5° Turning radius (inside) 3.65m 12ft Turning radius (outside) 6.91m 22ft 8in Max allowable side force 600N/400N...
  • Page 15 Max drive speed (raised) 0.68mph 1.1km/h Drive mode (drive×steer) 4WD×2WS Gradeability 45%/24° Turntable tail-swing 4ft 9in 1.45m Max allowable inclination 5° Turning radius (inside) 3.65m 12ft Turning radius (outside) 6.91m 22ft 8in TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 16 In cold weather, auxiliary devices are needed to start the machines. e) Rated platform capacity refers to the rated load of the platform, including the loads of persons, materials, tools, platform accessories and other objects borne by the platform. © Jun 2022 TB24 Plus&26J Plus Operation Manual...
  • Page 17 MACHINE SPECIFICATIONS TB24 Plus range of motion Restricted Unrestricted TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 18 MACHINE SPECIFICATIONS TB26J Plus range of motion Restricted Unrestricted © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 19: Machine Components

    MACHINE COMPONENTS 21 22 23 Figure 2-1 TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 20 Non-operating position: Boom rises at an angle not exceeding 15°, and extends not exceeding 1.2m (3.9 ft). Operating/raised position: Boom rises at an angle exceeding 15°, or extends beyond 1.2m (3.9 ft). © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 21: Safety

    In case of any accident involving the machinery of Also, people who have alcohol or drugs in their Hunan Sinoboom Intelligent Equipment Co., Ltd., notify system, or experience excessive fatigue or Hunan Sinoboom Intelligent Equipment Co., Ltd.

  • Page 22: Electrocution Hazards

    Table 3-1 Minimum Safe Distance Voltage Minimum Safe Distance (Phase to Phase, kV) (m/ft) 0-50 3.05 (10) 50-200 4.60 (15) 200-350 6.10 (20) 350 -500 7.62 (25) 500 -750 10.67 (35) 750 -1000 13.725 (45) © Jun 2022 TB24 Plus&26J Plus Operation Manual...
  • Page 23 Do not use the platform or boom uneven surfaces, or near holes assembly to push other machines and steep slopes, maintain a or objects. minimum distance of 0.6m (2ft) and reduce the speed. TB24 Plus&26J Plus Operation Manual © Jun 2022...

  • Page 24: Jobsite Hazards

    Do not lift the platform when the wind speed exceeds 12.5 m/s (28 mph). If the wind speed exceeds 12.5 m/s (28 mph) after the platform is lifted, © Jun 2022 TB24 Plus&26J Plus Operation Manual...
  • Page 25 If the machine is used in any other applications, or by any other means, as specified by fold the platform and do not Sinoboom, it must be approved or guided by the continue to operate the machine. manufacturer.

  • Page 26: Unsafe Operation Hazards

    The battery is vital to maintaining the stability of the machine. • Do not place or attach any suspended load onto any part of the machine. © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 27: Fall Hazards

    Maintenance Manual in addition to following more maintenance manual in addition to following more stringent industry regulations and workplace rules. stringent industry regulations and workplace rules. TB24 Plus&26J Plus Operation Manual © Jun 2022...

  • Page 28: Crush Hazards

    • Limit the speed of travel according to ground conditions, crowding, gradients, the presence and location of personnel and any © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 29: Explosion And Fire Hazards

    During operation, keep the left and right doors of the chassis closed and locked. Only trained service personnel can open the left and right doors to repair the machine. TB24 Plus&26J Plus Operation Manual © Jun 2022...

  • Page 30: Battery Hazards

    ELECTROCUTION HAZARD • Contact with hot circuit may cause serious injury or death. Be sure to wear goggles, gloves and protective clothing. • Remove all rings, watches and other accessories. © Jun 2022 3-10 TB24 Plus&26J Plus Operation Manual...
  • Page 31 • Do not tamper with battery system to avoid serious accident. • Cut off the battery main switch if the battery is not to be used for an extended period. TB24 Plus&26J Plus Operation Manual 3-11 © Jun 2022...

  • Page 32: Hydraulic Hazards

    OFF position. 7. Turn the key switch at the ground controls to OFF position and remove the key to avoid unauthorized operation of the machine. 8. Turn off the main power switch. © Jun 2022 3-12 TB24 Plus&26J Plus Operation Manual...
  • Page 33 SAFETY NOTICE After using the machine, the main power switch must be disconnected. TB24 Plus&26J Plus Operation Manual 3-13 © Jun 2022...
  • Page 34 SAFETY This Page Intentionally Left Blank © Jun 2022 3-14 TB24 Plus&26J Plus Operation Manual...

  • Page 35: Jobsite Inspection

    Operators must identify and avoid workplace hazards when mov- ing, installing and operating the machine. Unless approved by Sinoboom, never operate the ma- chine in a hazardous site. The following items present danger on the jobsite: •...
  • Page 36 JOBSITE INSPECTION This Page Intentionally Left Blank © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 37: Pre-Operation Inspection

    Never use a machine that has damaged or modified be certified as a qualified operator in operation of parts. Mark the machine and stop using the this machine. machine if you discover damage or modifications. TB24 Plus&26J Plus Operation Manual © Jun 2022...

  • Page 38: Conducting A Pre-Operation

    • Fuel tank and hydraulic tank the oil pump will suction air and damage hydraulic components. Performing daily inspection of the © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 39: Inpsecting Fuel Level

    3. When the fuel level is less than or equal to 10%, the alarm will sound, be sure to add fuel to continue working. TB24 Plus&26J Plus Operation Manual © Jun 2022...

  • Page 40: Inspecting Engine Oil Level

    4. Move the engine start switch and idle it for 2 minutes. 5. Switch off the engine, and 5 minutes later open the turntable cover on the right side. 6. Remove the engine dipstick to inspect the engine oil level. © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 41: Inspecting Coolant Level （Water

    The appropriate coolant level is vital to maintaining the below. engine performance and extending its service life, otherwise it will damage the engine parts. Through the daily check the inspector can know about the changes TB24 Plus&26J Plus Operation Manual © Jun 2022...

  • Page 42: Inspecting The Battery

    • Contact with live circuit may cause serious injury or death. B sure to wear goggles, gloves and protective clothing. • Remove all rings, watches and other jewelry. © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 43: Pre-Operation Function Test

    All the function tests of ground controller must be completed within one cycle. Do not use a machine with problems or malfunctions. Mark the machine and do not use it if you discover any TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 44 22. Ground control position 6. Enable switch 14. Platform rotate switch 7. Emergency power switch 15. Platform level switch 8. Electric/hybrid mode selector 16. Exhaust treatment switch switch (not used) (if equipped) © Jun 2022 TB24 Plus&26J Plus Operation Manual...
  • Page 45 21. Platform control position 22. Ground control position 6. Enable switch 14. Platform rotate switch 7. Emergency power switch 15. Platform level switch 8. After-treatment locking switch (if 16. Exhaust treatment switch (if equipped) equipped) TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 46 21. Heavy load indicator 9. Platform info 33. Overload limit 10. Alarm message 34. Drive limit (operating position) 22. Overload alarm 35. Drive and boom functions 23. Axle extended in place 11. Fault alarm allowed © Jun 2022 TB24 Plus&26J Plus Operation Manual...
  • Page 47 3. Turn the key switch at the ground controller to ON position. 4. Ensure the relevant indicator light on the display should be on and no error should be present. Horn button TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 48 FALL HAZARD Main boom up/down switch The platform leveling function is only used for slight adjustment of the platform. Improper operation may result in unintended movement or fall of the load/occupants. © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 49: Testing The Platform Controller

    2. Move the enable switch and meanwhile move downwards the jib rotate switch, the jib boom shall rotate clockwise. Emergency power switch TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 50 28. Power indicator light 8. Platform rotate switch 18. Steer direction 9. Not used 19. Drive/steer control handle 29. Horn button 10. Jib up/down switch-TB26J Plus 20. Drive direction 30. Buzzer button only © Jun 2022 TB24 Plus&26J Plus Operation Manual...
  • Page 51 Run the engine at low idle for 3–5min to preheat the engine before applying any loads. Light on indicates the platform controller is normally powered. Move and hold the glow plug switch for 6–10s, the Horn button engine should inhale for preheating. TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 52 Note: The turntable rotate speed is in direct proportion to the stroke of control handle. Note: The drive speed is in direct proportion to the Main boom up/down stroke of control handle. © Jun 2022 6-10 TB24 Plus&26J Plus Operation Manual...
  • Page 53 2. Depress the foot switch and move rightwards the main boom telescope/jib rotate proportional control handle, the jib should rotate counterclockwise. Note: The jib rotate speed is in direct proportion to the stroke of control handle. Platform level switch TB24 Plus&26J Plus Operation Manual 6-11 © Jun 2022...
  • Page 54 NOTICE • CAN bus error When driving reverse, the machine will drive and • Other faults steer in opposite direction as indicated. Chassis tilt indicator light Hydraulic generator switch (if equipped) © Jun 2022 6-12 TB24 Plus&26J Plus Operation Manual...
  • Page 55 When the main boom enters the automatic control sensor malfunction indicator light should be on. mode, the main boom auto control mode indicator light will be on. Range limit indicator light CAUTIO TB24 Plus&26J Plus Operation Manual 6-13 © Jun 2022...

  • Page 56: Testing The Drive Speed

    7. The tilt alarm should sound with the chassis tilt overloaded. indicator light flashing, no function should be restricted. Operating from the ground: 8. Drive the machine off and remove the wooden blocks. © Jun 2022 6-14 TB24 Plus&26J Plus Operation Manual...

  • Page 57: Testing The Envelope Restriction

    6. TB24 Plus：when the boom extends to the farthest than 1.2m (3ft 11in) should be allowed. (the ground display reads 20.36m of boom length), the buzzers at the ground and platform controls 11.

  • Page 58: Testing The Weighing System

    All motion functions will not resume until the excessive load is removed. © Jun 2022 6-16 TB24 Plus&26J Plus Operation Manual...

  • Page 59: Operating The Machine

    • Check the work site. tipping. • Check the safety decals/ nameplate on the machine. • Only use the machine according to the instructions in this manual and for its intended purpose. TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 60 Boom fully extended; Boom kept horizontal; Turntable rotated 90°; The machine will tip over in the direction as indicated by the arrow if overloaded or operated beyond the limits of the maximum operating slope. © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 61: Emergency Stop

    • Turn off the main power switch at the left side of turntable, the system power will be disconnected and all functions will get inoperative. The main TB24 Plus&26J Plus Operation Manual © Jun 2022...

  • Page 62: Emergency Lowering

    When the platform or boom is caught overhead: If the platform or boom becomes jammed or snagged in overhead structures or equipment, rescue all people in the platform before freeing the machine. © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 63: Operation From Ground

    Before applying any load, warm up the engine by running it at low speed for 3–5min. To position platform: 1. Move the enable switch and meanwhile move upwards/downwards the boom up/down switch to raise or lower the main boom. TB24 Plus&26J Plus Operation Manual © Jun 2022...

  • Page 64: Operation From Platform

    4. Depress the foot switch and meanwhile move upwards/downwards the platform level switch to level up/down the platform. © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 65: Driving On A Slope

    When in operating position, the machine can only drive at operating speed, and operation of the drive high/low To determine the slope grade： speed select switch will not enable the high speed mode. TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 66 2. Measure the height H and length/distance L of the slope. Figure 7-5 3. Slope grade= H/L x 100%. NOTICE The machine must not drive for over 2min on the maximum permissible slope grade to prevent the tires running suspended. © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 67: Transporting And Lifting The Machine

    When using a forklift or crane to lift the machine, beware not to collide the machine with the nearby objects. • Lock the wheels of the machine after it has been installed to prevent the machine from rolling. TB24 Plus&26J Plus Operation Manual © Jun 2022...

  • Page 68: Lifting The Machine With A Crane

    7. Only connect the rigging to the lifting point specified NOTICE on the machine. Adjust the rigging to avoid damage to the machine and to keep the machine horizontal. To protect the machine, choose the appropriate length of rigging. © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 69: Transporting The Machine

    2. Perform a thorough inspection of the machine to platform and ensure the platform is suspended in prevent loose or untightened components and the air. ensure the safety pin of turntable is locked. TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 70 TRANSPORTING AND LIFTING THE MACHINE Figure 8-3 © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 71: Maintenance

    Conduct a quarterly inspection on machines that repair the machine and must follow the procedures have been out of service for a period lasting longer as stated in operation manual and maintenance than three months. manual. TB24 Plus&26J Plus Operation Manual © Jun 2022...

  • Page 72: Following Amaintenance Schedule

    Every half a year or every 500 repair is completed and the box marked "- A+B+C hours REPAIRED" shall be checked. Select the appropriate inspection procedure based on the Every year or every 1000 hours A+B+C+D inspection type. © Jun 2022 TB24 Plus&26J Plus Operation Manual...
  • Page 73 YES/Machine is NO/Machine Has Problem Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction B-1 Inspect and Replace Hydraulic Oil Tank Return Filter Element B-2 Inspect Rim, Tire and Fasteners TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 74 B-22 Inspect Emergency Lowering B-23 Inspect Tilt Protection Checklist C Procedures REPAIRED/ YES/Machine is NO/Machine Has Problem Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction C-1 Replace Fuel Filter Element © Jun 2022 TB24 Plus&26J Plus Operation Manual...
  • Page 75 D-4 Replace Hydraulic Tank Suction Filter D-5 Replace Coolant and Coolant Hoses (water-cooled engine) D-6 Replace Fuel Hoses D-7 Inspect Boom Wear Pads User Inspector Signature Inspection Date Inspector Title Inspector Company TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 76 MAINTENANCE This Page Intentionally Left Blank © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 77: Decals/Nameplates Inspection

    Do not operate the engine if there are missing or badly worn safety labels. TB24 Plus&26J Plus Operation Manual 10-1 © Jun 2022...

  • Page 78: Decals/Nameplates-Gb

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES-GB 环保信息代码打刻在此位置 (19) (31) © Jun 2022 10-2 TB24 Plus&26J Plus Operation Manual...
  • Page 79 Decal-Tipping hazard (600N) 105071103005 Decal-Tipping hazard 105021100003 104011100019 Decal-Crush hazard 104011100009 Decal-Read manuals 104011100017 Decal-Foot switch 104011100021 Decal-Crush hazard Decal-Rated load 454kg 105049103002 Yellow-Black caution stripe 216060000002 Decal-Hydraulic oil level 104011100003 TB24 Plus&26J Plus Operation Manual 10-3 © Jun 2022...
  • Page 80 104009100018 104009100019 Decal-Diesel fuels Decal-Fuel-water separator 104009100020 Decal-Direction marking 105001100051 Decal-Direction marking 105001100053 Decal-Range of motion chart 105063103002 TB24 Plus Decal-Range of motion chart 105064103000 TB26J Plus Environmental label imprint position © Jun 2022 10-4 TB24 Plus&26J Plus Operation Manual...

  • Page 81: Decals/Nameplates (Ce-Metric)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (CE-METRIC) 环保信息代码打刻在此位置 (19) (31) TB24 Plus&26J Plus Operation Manual 10-5 © Jun 2022...
  • Page 82 Decal-Tipping hazard (600N) 105071103005 Decal-Tipping hazard 105021100003 104011100019 Decal-Crush hazard 104011100009 Decal-Read manuals 104011100017 Decal-Foot switch 104011100021 Decal-Crush hazard Decal-Rated load 454kg 105049103002 Yellow-Black caution stripe 216060000002 Decal-Hydraulic oil level 104011100003 © Jun 2022 10-6 TB24 Plus&26J Plus Operation Manual...
  • Page 83 Decal-Hydraulic oil temperature range 104010100021 Decal-Hydraulic oil 104009100022 104009100021 Decal-Diesel fuels Decal-Fuel-water separator 104009100020 Decal-Direction marking 105001100051 Decal-Direction marking 105001100053 Decal-Range of motion chart 105063103002 TB24 Plus Decal-Range of motion chart 105064103000 TB26J Plus TB24 Plus&26J Plus Operation Manual 10-7 © Jun 2022...

  • Page 84: Decals/Nameplates (Ce-Imperial)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (CE-IMPERIAL) 环保信息代码打刻在此位置 (19) (31) © Jun 2022 10-8 TB24 Plus&26J Plus Operation Manual...
  • Page 85 Decal-Tipping hazard (600N) 105071103005 Decal-Tipping hazard 105021100003 104011100019 Decal-Crush hazard 104011100009 Decal-Read manuals 104011100017 Decal-Foot switch 104011100021 Decal-Crush hazard Decal-Rated load 454kg 105049103002 Yellow-Black caution stripe 216060000002 Decal-Hydraulic oil level 104011100003 TB24 Plus&26J Plus Operation Manual 10-9 © Jun 2022...
  • Page 86 Decal-Hydraulic oil temperature range 104010100021 Decal-Hydraulic oil 104009100022 104009100021 Decal-Diesel fuels Decal-Fuel-water separator 104009100020 Decal-Direction marking 105001100051 Decal-Direction marking 105001100053 Decal-Range of motion chart 105063103002 TB24 Plus Decal-Range of motion chart 105064103000 TB26J Plus © Jun 2022 10-10 TB24 Plus&26J Plus Operation Manual...

  • Page 87: Decals/Nameplates (Ansi)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (ANSI) (19) (32) TB24 Plus&26J Plus Operation Manual 10-11 © Jun 2022...
  • Page 88 101016100030 Decal-Tipping hazard (600N) 105071103005 Decal-Tipping hazard 105021100003 104011100019 Decal-Crush hazard Decal-Operating instructions 105029103023 104011100009 Decal-Read manuals 104011100017 Decal-Foot switch 104011100021 Decal-Crush hazard Decal-Rated load 454kg 105046103004 Yellow-Black caution stripe 216060000002 © Jun 2022 10-12 TB24 Plus&26J Plus Operation Manual...
  • Page 89 Decal-Hydraulic oil 104009100022 104009100021 Decal-Diesel fuels Decal-Fuel-water separator 104009100020 Decal-Direction marking 105001100051 Decal-Direction marking 105001100053 Decal-Annual inspection 101040103015 Decal-Range of motion chart 105063103002 TB24 Plus Decal-Range of motion chart 105064103000 TB26J Plus TB24 Plus&26J Plus Operation Manual 10-13 © Jun 2022...

  • Page 90: Decals/Nameplates (Csa)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (CSA) (19) (32) © Jun 2022 10-14 TB24 Plus&26J Plus Operation Manual...
  • Page 91 Decal-Lanyard anchorage points 101016100030 Decal-Tipping hazard 103007103002 Decal-Tipping hazard 105021100003 104011100019 Decal-Crush hazard Decal-Operating instructions 105029103023 104011100009 Decal-Read manuals 104011100017 Decal-Foot switch 104011100021 Decal-Crush hazard Decal-Rated load 454kg 105046103004 Yellow-black caution stripe 216060000002 TB24 Plus&26J Plus Operation Manual 10-15 © Jun 2022...
  • Page 92 Decal-Hydraulic oil 104009100022 104009100021 Decal-Diesel fuels Decal-Fuel-water separator 104009100020 Decal-Direction marking 105001100051 Decal-Direction marking 105001100053 Decal-Annual inspection 101040103015 Decal-Range of motion chart 105063103002 TB24 Plus Decal-Range of motion chart 105064103000 TB26J Plus © Jun 2022 10-16 TB24 Plus&26J Plus Operation Manual...

  • Page 93: Plus

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES (AS)-TB26J PLUS (19) 只允许系挂1人 101048100014 (31) TB24 Plus&26J Plus Operation Manual 10-17 © Jun 2022...
  • Page 94 Decal-Read manuals 104011100017 Decal-Foot switch 104011100021 Decal-Crush hazard Decal-Rated load 454kg 105046103004 Yellow-black caution stripe 216060000002 Decal-Hydraulic oil level 104011100003 Decal-Hydraulic oil level 104011100010 Decal-Hydraulic oil temperature range 104010100021 Decal-Hydraulic oil 104009100022 © Jun 2022 10-18 TB24 Plus&26J Plus Operation Manual...
  • Page 95 DECALS/NAMEPLATES INSPECTION Description Qty. Part No. Remarks 104009100021 Decal-Diesel fuels Decal-Fuel-water separator 104009100020 Decal-Direction marking 105001100051 Decal-Direction marking 105001100053 Decal-Range of motion chart 105064103000 TB24 Plus&26J Plus Operation Manual 10-19 © Jun 2022...
  • Page 96 DECALS/NAMEPLATES INSPECTION This Page Intentionally Left Blank © Jun 2022 10-20 TB24 Plus&26J Plus Operation Manual...

  • Page 97: Appendix 1: Symbols And Description

    Never use machine Never use machine Never push or pull Never suspend objects Never place ladders during strong, gusty during strong, gusty objects outside from platform and scaffolding on the wind wind platform platform TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 98 No smoking Lifting point Lashing points Tire to ground load Hydraulic oil filler Platform carrying Do not use damaged Tool or weight Fast/high speed Slow/low speed capacity cords Horn © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 99: Appendix 2: Prepare The Work Record Before Delivery

    2. Use the table to record the results. After each section is complete, mark the appropriate box. 3. Record the inspection results. If any inspection results are "NO", the machine must be stopped and re- inspected after repair is completed and marked in the box marked "inspection". TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 100 DECALS/NAMEPLATES INSPECTION This Page Intentionally Left Blank © Jun 2022 TB24 Plus&26J Plus Operation Manual...

  • Page 101: Appendix 3: Repair & Inspection Report

    A-15 Perform Maintenance after 30 Days A-16 Perform Oscillate Cylinder Exhausting Checklist B Procedures REPAIRED/ YES/Machine is NO/Machine Has Problem Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 102 B-16 Test Cylinder Drift B-17 Inspect Counterbalance Valve Locking B-18 Inspect Electrical Wiring B-19 Inspect the Battery B-20 Test Oscillate Outriggers B-21 Test Drive Speed B-22 Inspect Emergency Lowering B-23 Inspect Tilt Protection © Jun 2022 TB24 Plus&26J Plus Operation Manual...
  • Page 103 D-3 Replace Hydraulic Oil D-4 Replace Hydraulic Tank Suction Filter D-5 Replace Coolant and Coolant Hoses (water-cooled engine) D-6 Replace Fuel Hoses D-7 Inspect Boom Wear Pads User Inspector Signature Inspection Date Inspector Title TB24 Plus&26J Plus Operation Manual © Jun 2022...
  • Page 104 "REPAIRED” shall be checked. Select the appropriate inspection procedure based on the inspection type. Select the appropriate inspection procedure based on the inspection type. © Jun 2022 TB24 Plus&26J Plus Operation Manual...
  • Page 106 Solution s Alw ays For B et t er A ccess Solution s Always for Better Access Solutions AS/N ZS Hunan Sinoboom Intelligent Equipment Co., Ltd. 长沙市宁乡高新技术产业园区金洲大道东 128 号 No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China 市宁乡高新技术产业园区金洲大道东...

This manual is also suitable for:

Tb800 plusTb26j plusTb860j plus

Table of Contents