Advertisement
| ER-1010ETE
DISASSEMBLY
INSTRUCTIONS
1.
Cabinet and Back Cover Removal (Refer to Fig. 7):
(1) Remove nine screws
'1' to '7' on the back and '8' to
'9' on the side of the cabinet.
(2) (The screws with washer are located '2' to '6'.)
(3) Remove the cabinet.
(4) Remove four screws '10' to '13'.
(5) Remove the back cover.
13
Fig. 7
2.
Oven Assembly Removal (Refer to Fig. 8)
Fig. 8
(1) Remove the cabinet parts.
(2) Remove three screws '1' at bottom of the oven front,
anda
screw '2' on the back of oven.
(3) Disconnect
the connector
'B' and two
leads of HV
transformer '3' from the magnetron '4',
(4) Remove the oven assembly.
3.
Magnetron Removal (Refer to Fig. 8)
(1)
Remove the oven assembly.
(2)
Remove
a screw
'5' which
secure
the duct
'6', and
remove it.
(3) Remove
three screws
'7' which secure the blower '8',
and remove it.
(4) Remove four nuts '9'.
(5) Remove the magnetron '4'.
Advertisement
