Adjusting The Compression Damping Of The Fork - GAS GAS MC 125 2021 Owner's Manual

10.14

Adjusting the compression damping of the fork

Info
The hydraulic compression damping determines the fork suspension behavior.
Info
This is due to the volume of the hose and not due to a
defect in the fork airpump or the fork.
Read the accompanying GASGAS Technical Accessories
instructions.
–
Adjust the air pressure as specified.
Guideline
Air pressure
Gradual changing of the air
pressure in steps of
Minimum air pressure
Maximum air pressure
Info
Never adjust the air pressure to a value outside the stated
range.
–
Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from the hose
– the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Turn adjusting screw
Info
Adjusting screw
fork leg.
–
Turn counterclockwise by the number of clicks corresponding to the
fork type.
Guideline
S04526-10
Compression damping
Comfort
Standard
Sport
TUNING THE CHASSIS 10
8.3 bar (120 psi)
0.2 bar (3 psi)
7 bar (102 psi)
12 bar (174 psi)
p. 42)
1
clockwise all the way.
1
is located at the upper end of the right
17 clicks
12 clicks
7 clicks
39