For Each Wall Panel, Carefully Lay Panel Face Down. Position And Attach A Bottom Wall Plate To; Low End Top Plate; Storage Shelves; Parts - OLT GC42-FJ-CEDAR Assembly Manual

B. Wall Section
Exploded view of all parts necessary to complete the Wall Section. Identify all parts prior to
starting.

Low End Top Plate

Rear Wall Panels (2)
Shelf Support
Cleats (2)
Shelf Supports - Angled
(2)

Storage Shelves (2)

Door Jambs (2)
Due to packaging constraints, bottom wall plates must be attached prior to erecting walls.
2.

For each Wall Panel, carefully lay panel face down. Position and attach a Bottom Wall Plate to

bottom of wall studs of each Wall Panel with 2 - 2 1/2" Brown Screws. Position so Plates are flush
with framing.
Side Wall Panels - Angled
(19 1/2" x 67") x 2
Rear Wall Panels

(19 1/2" x 61 3/8") x 2

Bottom Wall Plates
(1 1/2" x 1 1/2" x 19 1/2") x 4
Outdoor Living Today
Pilot hole ALL 2x2 Wall
Studs with 1/8" drill bit
prior to screwing. This will
make it much easier to
attach together.

Parts

www.outdoorlivingtoday.com
Important:
2 1/2" Brown Screws
Page 32
Wall Extender
Door Header
Side Wall
Panels -
Angled (2)
Bottom Wall Plates (4)
Hardware
x 8 total
sales@outdoorlivingtoday.com