Table of Contents
Advertisement
18.
Place two Shelf Supports underneath Shelf. Drill 2 - 2" Brown Screws through Shelf Support
into underside of Shelf at the top and through Shelf Support into Rear Wall Framing at the bottom.
Shelf Supports - Angled
(1 1/2' x 1 1/2" x 20 1/2") x 2
19.
Attach second Shelf as per Steps 17-18. Have a helper hold the shelf in place while you attach
it.
(16 3/8" x 22 1/2")
Shelf Supports - Angled
(1 1/2' x 1 1/2" x 20 1/2") x 2
Before Roof Section, once again take a diagonal measurement in both directions and square up the
shed. If diagonal measurement is more than 1/8" different between sides, try pushing corner of shed
in or out.
Outdoor Living Today
Parts
Parts
Shelf
www.outdoorlivingtoday.com
2" Brown Screws
2" Brown Screws
sales@outdoorlivingtoday.com
Page 17
Hardware
x 4 total
Hardware
x 6 total
Advertisement
Table of Contents
