Table of Contents
Advertisement
Resolving
Hardware
Conflicts
Resolving Conflicts
in Windows XP/
2000
5.
In the Properties dialog box, click the Settings tab and select Auto Insert
Notification.
6.
Click the OK button to exit from the dialog box.
Hardware conflicts may occur when two or more peripheral devices are set to use
the same I/O address, IRQ line or DMA channel.
To resolve conflicts in Windows XP, Windows 2000, Windows Me or Windows 98 SE,
change the resource settings of your PC Card or the conflicting peripheral device
using Device Manager.
To run Device Manager:
1.
Click Start -> Settings -> Control Panel.
2.
Click the System icon. The System Properties dialog box appears.
3.
Click the Hardware tab.
4.
Click the Device Manager button.
5.
Double-click Modem.
6.
Right-click the name of your PC Card. A menu appears.
7.
Select the Properties option.
8.
Click the Resources tab.
9.
Click the Use Automatic Settings check box to select it. If this check box is
already selected, you need to go to the Properties dialog box of the
conflicting peripheral device and select the same check box there.
Restart your system to allow Windows XP/2000 to reassign resources to your PC
Card and/or the conflicting peripheral device.
Troubleshooting B-2
Advertisement
Table of Contents
