Table of Contents
Advertisement
Using the DSP Effects
The DSP Effects Section: Names and Functions
CH SELECT
8697
1. Channel Select (CH SELECT)
This selects the channel to which the effect is applied.
2. Frequency Range (FREQ RANGE)
This selects the frequency range to which the effect is
applied.
@ FULL (All Frequency Ranges): Applies effects to all
frequency ranges.
@ HIGH (High Range): Applies effects to the higher fre-
quency ranges.
@ MID (Middle Range): Applies effects to the middle
frequency ranges.
@ LOW (Low Range): Applies effects to the lower fre-
quency ranges.
3. Sync Type (SYNC TYPE)
This is for selecting the beat for synchronizing the DSP
effect. BPM is the standard used for the beat.
@ When only one LED (indicator) is lit or flashes, the
beat at the right of the indicator is selected.
Qo
@ When two indicators are lit or flash, the beat between
these two indicators is selected.
is selected
=
w—'f : is selected
H
10
4. BPM SYNC
@ BPM SYNC Button
With this button pressed, DSP effects can be synchronized in
time with the beat selected for SYNC TYPE.
See the descriptions for each effect.
@ BPM SYNC Indicator
Flashes in time with the beat when BPM SYNC is on.
5. Parameter Controls
@ RATE/CUTOFF
See the descriptions for each effect, and the PARAMETER
CHART (p.17) for more on the functions this knob performs.
@ PITCH/DEPTH
See the descriptions for each effect, and the PARAMETER
CHART (p.17) for more on the functions this knob performs.
@ FORMANT/RESO
(Resonance)
See the descriptions for each effect, and the PARAMETER
CHART (p.17) for more on the functions this knob performs.
6. Effect Select Buttons
These select the type of effect to be added. (p.11)
7. MIDI CONTROL Button
This button is used to start and stop a connected MIDI
device. (p.19)
8. BPM Display
This displays the currently recorded BPM. (p.18)
9. BPM ADJ Buttons
These are used for manually setting the BPM. (p.18)
10. TAP Button
This is used
for setting the BPM
in real time. (p.18)
Additionally, this works as a SHIFT key when making
the following settings.
@ When selecting effects (p.12,13,14,15,16)
@ When setting the BPM in 0.1 units (p.18)
® When automatically synchronizing MIDI devices
"start" with the beat (p.19)
Advertisement
Table of Contents
