To Change Timer Settings; Lf You Make A Mistake While Setting The Ti; Timer Recording; To Check Timer Settings - Pioneer XC-P410T Operating Instructions Manual

TIMER RECORDING
To check timer settings
1 TIMER
SET
{a |
a
2 REC
a)
Press TIMER SET.
Press REC (+) within five seconds.
After five seconds, the display changes to the
check mode, and timer settings are displayed in
order.
WN =a
To change timer settings
To change all of the timer settings, start over again, inputting
the settings that you want.
To change only one of the timer settings (after pressing
TIMER SET and REC), press TIMER SET repeatedly until the
display shows the item that you wish to change. Then use
"—" and "+" to adjust the setting. Finally, repeatedly press
TIMER SET to advance to the end of the procedure.
timer
lf you make a mistake while setting the |
Go ahead to the next item and continue setting the various
items untilyou finish. Then use the "To change timer settings"
procedure to change the value of the item that was incorrect.
Turning the timer on and off
Confirm that the REC indicator is lit on the display.
Timer recording ends after being performed once. However,
since the settings remain stored in memory, you can reactivate
the timer by pressing TIMER REC so that the REC indicator is
lit again.
36
<RRB1090>
En
About timer setting priority
ON time: if REC timer and WAKE UP 1/2 timer are both at
the same ON times, REC timer takes priority.
OFF time: When REC timer, WAKE UP 1/2 timer and
SLEEP timer operate, earlier OFF time takes
priority.
annoy
MAIN
Cleani
The heads
tobecome
the high -
reproduce
ina deteric
that the h
@ Press|
@ Dipac
wipe th
until th
NOTE:
This unit |
that the h
HR
Dema
The recor
use the te
in noise t
recording
therefore
head der
For furth
accompa
NOTES:
@ Dono
to the
@ When
switel