Table of Contents
Advertisement
Timer Recording
To change or correct the setting before completing it
Press <4 to return to the item to be changed.
If a power interruption occurs
© If a power interruption lasting less than approximately
To preset another program
three hours occurs while the VCR is waiting for the
Move the cursor to the second line after step 11 and repeat
preset time, the VCR will re-enter the timer recording
steps 4 to 11.
standby mode.
© If a power interruption lasting more than approximately
To record video sources from LINE IN 1 or 2 jacks
three hours occurs before a timer recording, the
Press INPUT SELECT in step 4 to 10 to call up LINE 1 or 2
memory clears. Reset the date and time for timer
under the "CH" position. The indication returns to channel
recording.
numbers on the third press.
© |f a power interruption lasting less than approximately
three hours occurs during a timer recording, the VCR
Problems when TIMER REC (ON/OFF) is pressed
starts recording again and the tape counter indicates
"OHOOMOCS."
The cassette ejects
| The safety tab on the inserted
cassette has been removed.
The TIMER indicator | ¢ No cassette has been inserted.
does not appear
© The tape is at its end.
Daily/Weekly Recording
You can preset the timer-activated recording to the same
program every day of the week (Daily recording), or one day
of the week (Weekly recording).
Follow steps 1 through 4 in "Setting the Timer" (page 34).
You can select the following programs.
Each time you press Y, the indication under DATE on
screen changes in the following order:
SUN—SAT
(Every day of the week)
MON-SAT
(Every day except Sunday)
MON—FRI
(Every day except
Saturday and Sunday)
4
EVERY SAT
EVERY TUE
eveRY MON
every SUN
When your desired daily/weekly recording program is set and
transmitted to the VCR, the corresponding indicator lights in
the display window.
3 6
Basic Operations
Advertisement
Table of Contents
