Basic Functions - Sony STR-DE985 Operating Instructions Manual

Jacks and connecgon examples
MD deck
On CONTROL A1 jacks and
connections
It is possible to make connections
between
CONTROL A 1 and CONTROL A 111jacks.
For details regarding p_wticular connections or
set up options, refer to the operating
instructions supplied with tbe component(s).
About the connecting cord
Some CONTROL A1 compatible components
we supplied with a connecting cord as an
accessory. In this case, use the connecting cord
for your connection.
When using a commercially available cord, use
a monaural mini-plug cord less than 2 meters
long, with no resistance (such as the Sony
RK-G69HG).
Basic Functions
The CONTROL A1 II functions will operate as
long as the component you w_mt to operate is
turned on, even if all of the other connected
components we not turned on.
Automatic function selection
When you connect a CONTROL A1 lI
compatible Sony amplifier (or receiver) to
other Sony components using monaural mini-
plug cords, the function selector on the
amplifier (or receiver) automatically switches
to the correct input when you press the play
button on one of the connected components.
Notes
• You must connect
a CONTROL AI compatible
amplifier (receiver) using a monaural mini@ug
cord in order to take advantage of the automatic
funcbon selection feature.
• This function only works when the components ale
connected to the amplifier (or receiver) inputs
according to the names on the function buttons.
Certain receivers allow you to switch the names of
the function buttons. In dfis case, refer to the
operating instructions supplied with the receiver.
• When recording, do not play any compcmems other
than the recording source. It will cause the
automatic function selection to operale.
Synchronized recording
Tiffs function lets you conduct synchronized
recording between the selected source and
recorder components.
1
Set the function selector on the
amplifier (or receiver) to the source
component.
2 Set the source component to pause
mode (make sure both the _ and II
indicators light together).
3 Set the recorder component to the
REC-PAUSE mode.
4
Press PAUSE on the recorder
component.
The source component is released from
the pause mode, and recording begins
shortly thereafter.
When playback ends from the source
component, recording stops.
Notes
• DO not set more fllan one comportent 10 the pause
mode.
• Certain recorder components may be equipped with
a special synchronized recording function that uses
the CONTROL AllI Control System, such as "CD
Synchro Dubbing". In this case, l_fer to the
operating instructions supplied with the recorder
componenL
IT
O
'O
a
o
47us