Sony STR-DE985 Operating Instructions Manual page 42
Hide thumbs
Also See for STR-DE985:
- Operating instructions manual (77 pages) ,
- Product information (2 pages) ,
- Dimensional information (1 page)
Table of Contents
Advertisement
You con enter a name (index name) of up to 8
characters
for preset st_dons and program
sources. These names (for example,
"VHS')
_ppear in the receiver's
display when a station
or program source is selected.
Note that no
more than one name can be entered
for each
preset st_tion or program source.
This function
is useful for distinguishing
components
of the same kind.
For ex_tmple,
two VCRs can be specified
as "VHS" and
"gMM',
respectively.
It is also handy t_r
identifying
components
connected
to jacks
meant for _mother type of component,
for
example,
a second CD player connected
to the
MD/DAT
jacks (STR-DE985)
or MD/TAPE
jacks (STR-DEg85).
1
To name
a preset
station
Rotate FUNCTION to select TUNER,
then tune in the preset station you want
to create an index name for.
The last station you received is tuned in.
If you we not familiar with how to tune in
preset stations, see "Tuning to preset
stations"
on page 41.
To name
a program
source
Select the program source (component)
to be named.
2 Press CUSTOMIZE.
3
Press <_ or _> repeatedly
until
"NAME IN?" appears in the display.
4
Press ENTER.
5 Create an index name by using the jog
dial and <_ or _>:
Turn the jog dial to select a character,
then
press _ to move the cursor to the next
position.
To insert
a space
Turn the jog dial until a blank space appears
in the display.
If you've
made
a mistake
Press _ or _ repeatedly
until the character
to be changed
flt_shes, then turn tile jog dial
42U5
to select tile right character.
6Prese
ENTER.
7 Repeat steps 2 to 6 to assign index
name foranotherstation
orprogram
source,
Note
Wher_ MULTI CH DIRECT
(for STR-DE985,
MULTI CH ! (or 2) DIRECT)
is selected, "NAME
INT" does not appear in the display.
Before you begin, make sure you've
connected
*dl components
properly.
Recording
on an audio tape
or MiniDisc
You c,qn record on a cassette tape or MiniDisc
using the receiver.
See the operzting
instructions
of your cassette deck or MD deck
if you need help.
1
Select the component to be recorded.
2
Prepare the component for playing.
For example,
insert _ CD into the CD
player.
3
Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
4 Start recording on the recording deck,
then start playback on the playback
component.
Advertisement
Table of Contents
