Table of Contents
Advertisement
Redback® A 4469 Audio Switcher
7.0 A 4660 HOME SCREEN
Figure 9 below outlines the main functions of the A 4660.
2
5
6
1
Menu Button - Press this to access the system settings (see section 8.0)
2
Zone Selection - To page to a zone select the desired zones by pressing the buttons 1- 4
3
Page Button - Press this button to page to selected zones. Press again to cancel paging or press the cancel
button.
Note: If the Chime In or Chime Out are enabled (see section 8.6) these will activate before and/or after paging is
available.
4
All Call Button - Press this button to quick select all zones.
5
Store/Recall Button - Use this button to store zones to a fast recall button.
To store a group of zones select the zones you wish to group together. Once the desired zones are
selected, press store. You can now assign a group to a button. Select a button and give it a label using
the displayed keyboard. Press enter when done.
To recall zones press the recall button and select one of the labelled buttons to recall. The zones stored
in this group will then illuminate automatically. Press the page button to page.
6
BGM Disabled/Enabled - Press this button to enable or disable the background music option (see section 9.0).
7
BGM active indicator - The dot in the corner of the zone button indicates which zones have the BGM selected.
10
Redback® Proudly Made In Australia
1
7
Installer Label
BGM will play from SD card
Zone 1
Zone 2
Recall
All Call
BGM
DISABLED
4
Fig 9
Zone 3
Zone 4
Page
Select a zone to begin
www.redbackaudio.com.au
3
Advertisement
Table of Contents
