Philips 180B2W7499 User Manual page 24

FAQs (Frequently Asked Questions)
Q:
What does "refresh rate" mean to me in an LCD monitor?
A:
For LCD monitors, the refresh rate is much less relevant. LCD monitors display a stable,
flicker-free image at 60Hz. There is no visible differences between 85Hz and 60Hz.
Q:
What are the .inf and .icm files on the setup disk & CD-ROM? How do I install the drivers (.inf and
.icm)?
A:
These are the driver files for your monitor. Follow the instructions in your user manual to install
the drivers. You computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when
you first install your monitor. Follow the instructions to insert the driver disk (either floppy or
CD-ROM) included in this package. Monitor drivers (.inf and .icm files) will be installed
automatically.
Q:
How do I adjust resolution?
A:
Your video card/graphic driver and monitor together determine the available resolutions. You
can select desired resolution under Window 95/98 with the "Display properties/Settings" control
panel
Q:
What if I get lost when making monitor adjustments?
A:
Simply press the OSD button, then select "Reset" to recall all original factory settings.
Q:
What is the Auto function?
A:
The AUTO adjustment key restores optimal screen position, phase and clock settings with the
press of a single button – without navigation through OSD menus and control keys.
Q:
My Monitor has no power (Power LED does not light) ? What should I do?
A:
Make sure the AC power cord is connected to the Monitor.
Q:
Will the LCD monitor accept an Interlaced signal?
A:
No If an Interlace signal is used, the screen displays both odd and even horizontal scanning lines
at the same time, distorting the picture.
file:///D|/Grace/K1/english/180b2sw/safety/saf_faq.htm (2 of 8) [6/2/2002 5:24:22 PM]