Pioneer XC-L7 Operating Instructions Manual page 7

(When combining the display unit with a CD re-
ceiver, MD recorder and cassette deck.)
CONNECTING THE SYSTEM CA-
BLES AND DISPLAY UNIT CORD
( Connecting the system cables.
@ Display Unit DU-L7
(2) Stereo CD Receiver XC-L7
@ Optional MiniDisc Recorder MJ-L7
4) Optional Stereo Cassette Deck CT-L7
To insert To remove
Hold the connector, Hold-the connector se-
then press in firmly un- curely on both sides
til a click is heard. and pull out.
ess - v
Mit
%
NOTE:
Do NOT connect or disconnect the system cables while
the power plug fs still connected to a power outlet.
Failure to heed this warning may result in a breakdown.
Connect the inputs and outputs of the system cables
so that the components are connected like beads ona
string.
@ The components may be connected in any order.
(Connections for the CD receiver, MD recorder and cas-
sette deck]
Connect Connect
(When combining the display unit with a CD receiver
and cassette deck.)
[Connections for the CD receiver and cassette deck]
Connect
6) Connecting the display unit cord
Use the display unit cord to connect the display unit
to the CD receiver's DU-L7 connector.
@ Therear panel ofthe dispiay unit is provided with
two hook holes, allowing the unit to be mounted
on a wall or other secure vertical surface.
NOTES:
@ When using the display unit in a wall-mounted fo-
cation, take full precautions to prevent the unit from
accidentally falling.
@® Screws and other fixtures for use in wall mounting
are not included.
Pioneer bears no responsibility for accidents result-
ing from faulty assembly or installation, insufficient
mounting strength of wails or other building fix-
tures, misuse or natural disasters.
The L-type connector is attached to the display unit.
Holes for mounting hooks
To CD Receiver XC-
L7's dedicated DU-L7
connector.
En <ARB7126> 7