Synchro Recording (Cd-+Tape) - Pioneer XC-L7 Operating Instructions Manual

SYNCHRO RECORDING (CD— TAPE) |
1. Use the display unit or remote control unit
to select the TAPE function.
2. Insert the cassette tape onto which you
wish to record.
(For more details, «= P. 18, 22).
3. Press the DOLBY B NR button to set the
Dolby noise reduction function ON or OFF
as desired.
Each time the button is pressed, the function turns
alternately ON and OFF as shown.
oe ort «1
4, Press the play/direction button correspond-
ing to the tape direction in which you wish
to record.
The display unit's indicator will show the direction.
—
FIV /AM/STATION | A a
The tape travel! di- Side A (»)
rection changes al- _
ternately each time Side B (4)
the button is pres-
sed.
Press the stop button (m) after selecting the record-
ing direction.
DOLaY BNA
5. Select the desired reverse mode.
(For mare details, =P. 18.)
=: Recording stops after one side.
=). C=): ~=—i(If recording is started from side A (» di-
rection), recording continues to side B (4
direction). If recording is started from
side B («4 direction), recording stops af-
ter completion of recording on side B
only.
6. Use the display unit or remote control unit
to select the CD function.
'| Ge
7. Load the CD from which you wish to record.
Label side facing up.
Label surface
8. Use the Ed, E+] buttons to select the track
you wish to record (1-track synchro record-
ing).
— Pee
@ When a track is designated in this way, 1-track
synchro recording will be automatically selected.
.@ Torecord all tracks on the disc, omit the above step
{do not designate any specific track) and with the
CD stopped, confirm that the display is showing
the total track display.
if the total track display is not showing, press the
CD stop button (m).
En <ARB?7126> @