Luxor L-150 Easel Instruction Sheet

Instruction Sheet - L-150 Easel
Customer Service Dept
2245 Delany Rd
Waukegan, IL 60087
Ph: 847/244-1800 • 800/323-4656
Fax: 847/244-1818 • 800/327-1698
1
CENTER BRACE
LEFT LEG
SUPPORT
Step 1 RUBBER FEET
Lay the left leg, the right leg, and center brace
on the ground with the pre drilled holes facing
up. Then attach the top support brace and bot-
tom support brace using 1 1 /2" wood screws.
Note: You will use all 10 1 1 /2" screws for this
step.
L-150
2
TOP
SUPPORT
BRACE
RIGHT LEG
SUPPORT
BOTTOM
SUPPORT
BRACE
Step 2
Attach the hinge to the back support leg using two 1 /2" screws.Then attach the other part
of the hinge to the top support brace using two 1 /2" screws. Now stand unit upright to
attach remaining parts.
1 - R Support Leg
1 - Top support Brace
1 - Leg Adjuster
1 - Tray Adjuster Handle
1 - Pan Head Screw
4 - 1" Screws
2 - Wing Nuts
RUBBER FEET
PARTS LIST
1 - L Support Leg
1 - Bottom Support Brace 1 - Back Support Leg
1 - Tray Bottom
10 - 1 1/2" Screws
1 - 1 1/4" Screw
2 - Long Bolts
1 - Hinge
HINGE
BACK SUPPORT LEG
1 - Center Brace
1 - Tray Back
4 - 1/2" Screws
1 - Gold Tube
4 - Washers