Luxor AVJ-OH Instruction Sheet

Instruction Sheet - O
Model AVJ-OH
Customer Service Dept
2245 Delany Rd
Waukegan, IL 60087
Ph: 847/244-1800 • 800/323-4656
Fax: 847/244-1818 • 800/327-1698
A
Cabling
Hole
Top
Stand

Assembly

Casters with
brake in front
1. Turn bottom stand assembly upside down on a smooth surface. Push the four casters firmly
into the caster socket holes in bottom of each leg as illustrated. IMPORTANT: Casters must
be fully seated.Turn the bottom stand assembly right side up.
2. Position top stand assembly over bottom stand assembly as illustrated. Adjust top stand
assembly up or down to desired height.Align holes in all four legs, insert bolts and fasten with
four wing nuts as illustrated.
P T
VERHEAD ROJECTOR ABLES
B
Note: Overhead pan is set flush with top
shelf for
Wing Nut
tions
1. Measure the height of your overhead projector -
then choose the height of shelf and assemble
Brace 1
Bolt
Bottom
Stand
Assembly
Note:When bottom holes on Brace 1
are matched with holes on Brace 2, it
gives you depth as shown.
2. Adjust braces together with 8 x
and nuts as shown to desired height to
all three support braces.
AVJ-OH
shipping. See B-2 for setting instruc-
Brace 2
10˝
9˝
8˝
7˝
6˝
Outside
Inside Brace
⁄ ˝ bolts
3
8

PARTS LIST

1 - Top Stand Assembly
1 - Bottom Stand Assembly
4 - Large Bolts
4 - Wing Nuts
2 - Casters With Brake
2 - Casters Without Brake Tools Required:
1 - Power Cord Screwdriver
1 - "U" Bracket
1 - Cord Wrap
2 - Small Screws
2 - Small Nuts
3. Reattach platform to bottom holes
of support braces with 8 x ⁄
1
2
bolts.
4. See reverse side for assembly of electric assembly.
˝