Luxor AVJ422KB4 Instruction Sheet

Instruction Sheet
Model AVJ422KB4
Customer Service Dept
2245 Delany Rd
Waukegan, IL 60087
Ph: 847/244-1800 • 800/323-4656
Fax: 847/244-1818 • 800/327-1698
Step 1
MOUSE SHELF ASSEMBLY
(Note: For the mouse shelf to pull out to the right, use the first set
of holes on the left side and the third set of holes.)
Mouse shelf rail
Attach the mouse shelf support bars to the first holes and third holes on the bottom of
the keyboard shelf with 4-sheet screws. Then align the brackets on the mouse shelf to
the holes on the support bars and attach using 8 sheet metal screws.
Mouse shelf
Step 2
Mount the four L-Brackets to the holes on the top shelf
using 4- bolts, 4- washers and 4- nuts. Be sure brackets are
pointing outward. Then align the two threaded holes on the
side of the runners to the hole on the brackets and attach
with two pan head screws. Do the same to the other side.
Top Shelf
Step 3
Repeat step 2 for second shelf.
Step 4
Extend runners outward and align the holes on the side
of the keyboard
to the first hole
and last hole on
the slides, and
attach with two
sheet metal
screws on each
Runners shown
attached for side. Repeat for
illustrative
second shelf.
purposes, do not
attach until step 4.
AVJ422KB4
5. Turn bottom stand assembly upside down on a smooth surface. Push
the four casters firmly into the caster socket holes in bottom of each leg
as illustrated.
Top
PARTS LIST FOR SHELF ASSEMBLY
8 - L-brackets
8 - Washers
8 - Bolts
8 - Nuts
8 - Self tapping screws
32 - Sheet metal screws
4 - Runners
2- Keyboard Shelf Racks
Back
Place locking casters as
illustrated
Front