Titan TTL758CHN Manual page 10

TTL758CHN
EN
Additional chain saw safety warnings
1. We recommend the use of a residual current
2. Position the extension cord so that it will not be
3. We recommend that the first-time users should,
4. The machine shall be used in a covered and dry
Vibration and noise reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use low-
vibration and low-noise operating modes as well as
wear personal protective equipment.
Take the following points into account to minimize
the vibration and noise exposure risks:
1. Only use the product as intended by its design
2. Ensure that the product is in good condition and
3. Use correct application tools for the product and
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these
6. Plan your work schedule to spread any high
10
increased kickback.
device with a tripping current of 30 mA or less.
caught on branches and the like, during cutting.
as a minimum practice, cutting logs on a saw-
horse or cradle.
area. The ambient temperature shall be included
between 15°C and 30°C. The humidity level
shall be less than 60%."
and these instructions.
well maintained.
ensure they in good condition.
instructions and keep it well lubricated (where
appropriate).
vibration tool use across a number of days.
Safety information