Yamaha V50 Operating Manual page 59

Hide thumbs Also See for V50:
Table of Contents

Advertisement

£ ^
5: Delay L/R
Delayed sound spread to left/right
6: Stereo Echo
Echo spread left/right
7; Distortion Rev.
Combination of distortion and reverb
8: Distortion Echo
Combination of distortion and echo
9: Gate Reverb
Reverberation with "artificially" fast cutoff
10: Reverse Gate
Reverberation simulating backwards tape playback
11: Early Ref
Adds early acoustic reflections to the sound
12: Tone Control
Simulated equalizer
13: Delay & Reverb
Combination of delay and reverb
14; DelayL/R & Rev.
Combination of delay L/R and reverb
15: Dist. & Delay
Combination of distortion and delay
16: Church
Reverberation simulating a church
17; Club
Reverberation simulating a music club
18: Stage
Reverberation simulating a larger live music club
19: Bath Room
Reverberation simulating a bathroom
20: Metal
Metallic reverberation
21: Tunnel
Reverberation simulating a tunnel
22; Doubler 1
Doubling effect
23; Doubler 2
Doubling effect (spread left and right)
24:
Feed Back Gate
Gate reverb with feedback
25: F. Back Reverse
Reverse gate with feedback
26: Feed Back E/R
Early reflections with feedback
27: Delay & Tonel
Combination of delay and tone control |
28: Dly L/R & Tonel
Combination of delay L/R and tone control 1
29: Tone Control 2
Tone control using low pass filter and high pass filter
30: Delay & Tone2
Combination of delay and tone control 2
31: Dly L/R & Tone2
Combination of delay L/R and tone control 2
32: Distortion
Distortion effect
(2) Effect balance
@ Function
Set the volume
balance
of the effect and the un-
processed sound.
@ Settings
0% — 100%
E Explanation
Higher settings will increase the volume of the effect
(processed sound). Lower settings will increase the
volume of the unprocessed sound.
Note:
At a setting of 0%, no effect (processed sound) will
be heard.
At a setting of 100%, you will hear only
the effect, and the direct unprocessed sound will not
be heard.
Effect output level, stereo mix
Press [__] (EFFECT) twice. (If the previous item effect
select has been set to "off", this will not be displayed.)
Shereoh1s
r

Advertisement

Table of Contents
loading

Table of Contents