Yamaha V50 Operating Manual page 17

6^
(2) Press [PRESET]. The lower left of the display will
show "P??", as follows.
FLAY SIHGLE EFI
Pe? Strings 1 F
=KevRoom: Fi Fbs 2
CTr Flt 1
è Select a preset voice number (00 — 99) in the same
way as you selected a preset performance. Use
the numeric keys to directly enter a two-digit
number, or use to step through preset
performances one by one.
This should give you an idea of the types of sounds
the V50 can produce. Using the simple procedures
you have just learned, you will be able to select and
play a variety of sounds. Those who want to take
full advantage of the V50 can continue reading to
learn more.
Pressing when already in per-
formance play mode, or pressing when
already in single play mode will make the display show
"Sending PC No.---". The display will return to
normal when you release the button. This function
allows you to transmit a "Program Change" message
from MIDI OUT. This function is meaningless when
using the V50 by itself. For details, see page 103.
Note:
Since voice and performance memories are numbered
from 00 to 99, selecting a memory usually requires
you to enter a two-digit number. However, the "Bank
Hold" feature allows you to select memories by
pressing a single button. While holding [= } , press
[7]. to turn Bank Hold on. When Bank Hold is
on, pressing a single numeric key will immediately
select the memory in the group of 10's that is currently
selected. For example if memory 23 was selected
when you turned Bank Hold on, pressing [_9_]. would
immediately select 29, and pressing 4 would imme-
diately select 24. While holding [=], press [-8 ].
to turn Bank Hold off.
Introducing the V50 13