Advertisement
Notes:
The unitis in the "stand-by" condition when the AC power
supply cord is connected.
The primary circuit is always "live" as long as the power
cord is connected to an electrical outlet.
1 Place a dise on the platter mat.
For a 17-cm (7")
(large center hole) disc
"a
Ce
Dis¢
45-rpm adaptor
Platter mat
45-rpm adaptor
Strobe lines
When the platter rotates, the strobe
lines form a stripe pattern according
to the rotation speed.
Strobe-illuminator/
pilot lamp
Record size detector
Set to disc's speed.
3 [hem com]
Remove the
arm clamp.
Tonearm
Detects the size of the record on the platter automatically.
Repeat switch (repeat)
to the off position.
Cartridge
(TaD) is the standard mark for the "P-mount" plug-in-connector
Tonearm
manually.
@Discs other than 17- or 30-cm discs
e Lightweight discs such as "Sonosheets"
eBadly warped discs
—_
Follow the steps
1~ 4of the automatic play.
Set the cueing control to the "Y" position.
3. Move the tonearm to the desired position
by hand.
(The platter will start turning.)
N
(Play will start.)
the repeat switch or the tonearm.
the platter stop.
2. Attach the stylus
(The tape on side of
cartridge prevents the
stylus assembly from
shaking loose during
shipment.)
af
Protector
Start/stop switch
(start/stop)
Press.
(The platter will start turning,
then play will start.)
(The tonearm won't move if
there is no disc on the platter
mat.)
@ When play ends
1. The tonearm will
automatically return to the
arm rest
(the automatic return
feature).
2. Rotation will stop.
Press to step the play.
Cueing control (cueing)
Set to "Y" to stop the play
temporarily.
Set to "¥" to resume the play.
1. Clamp the tonearm.
Tonearm
protector.
Protector
(
Advertisement
