Jofran 2231-BS405KD Manual

•
JOFRAN
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come
loose inside the carton during shipment. DO NOT use power tools to assembly.
Parts key
Code
No
2
2231-BS405KDP41
2231-BS405KDP42
3
4
2231-BS405KDP43
2231-BS405KDP44
5
6 2231-BS405KDP45
2231-BS405KDP49
7
8
2231P01F
STEP:01
- Carefully lay the Chair Back flat on a smooth flat surface
to prevent scratches.
- Attach Complete Seat to Chair Back by inserting a Flat
Washer (E), Lock Washer (D) with Short Bolt (C) into
each of the hole on the back rail of the seat. Attach the
Long Bolt(A), Lock Washer (D) and Flat Washer (E) into
each of 2 holes in the Complete Seat corners.
(See Detail A & B).
- Tighten screws with provided Allen Key (F) by turning
clockwise until secure.
*** FABRIC CARE:
Avoid direct sunlight ,water,oil,acid,sharp objects etc.
Use vacuum cleaner to clean. Wipe spills immediately.
If needed, spot clean with a mild water-based soap.
Fabric content 100% Polyester, Cleaning Code W
MADE IN VIET NAM
INC.
Q ty
Description
1 pc
Chair Back
Complete Seat
1 pc
1 pc
Right Facing Front Leg
1 pc Left Facing Front Leg
1 pc
Right Facing Side Stretcher
1 pc Left Facing Side Stretcher
1 pc
Front Stretcher
4 pcs Floor glide
ISTEP:02I
- Carefully turn Chair upside down
and attach each Leg to the front
corners of the Complete Seat making
4 note of the right side facing and the
left side facing leg. The stretcher
holes for the front stretcher are lower
than the side.
- Atach the legs with a Flat Washer
(E),
using the Allen Key (F).
- Do not fully tighten the Bolts at this
stage until all the parts are in position
(See Detail C).
- Insert 2 Side Stretchers between
the Front Legs, fasten by hand with
Wood Screw (G) using a phillfp-head
screwdriver. (not provided). (See
Detail D). Once in place, tighten all
the leg bolts.
REV 23
ASSEMBLY INSTRUCTIONS &
PARTS IDENTIFICATION
MODEL # 2231 - BS405KD
TELLURIDE DRIFTWOOD
UPH COUNTER STOOL
Hardware Kit 2231-BS405KD46P01
Code
No
.-,
.- -
A
B
C
�
D
--
®
E
;-
F
/
G
8)---------\"Y
Lock Washer (D) and Bolt (B)
Q ty
Description
4 pcs Long Bolt 07.8 x 80mm
4 pcs
Medium Bolt 07.8 x 50mm
Short Bolt 07.8 x 35mm
3 pcs
11 pcs
Lock Washer 08.5
11 pcs
Flat Washer 08.5
4 pcs
Allen Key
6 pcs
Screw 04x40mm
3
1/1