Quick Start; Control Panel; Operating Buttons - NuWave PRO PLUS 2 Owner's Manual

QUICK START

CONTROL PANEL

The maximum selectable cooking time differs depending on the selected
cooking temperature.
50°F ~ 320°F
325°F ~ 350°F
• If the temperature entered is higher than the maximum temperature of 350°F
the unit will display 350F and run at 350°F.
• If the time entered is above the maximum time for the set temperature range,
NuWave Pro Plus 2 Black Control Panel - Graphic
the unit will display and run at the maxium time allowed according to chart above.
09-22-23-JD
Do not touch the Power Dome or any surface on the cooking area
during operation. The air inside the Powe Dome can reach 350°F
which makes the surface very hot and may cause burns. Do not open
the Power Dome or remove the Power Head while the NuWave Oven
is operating. Turn off the power before removal.

OPERATING BUTTONS

: Press
current cooking function.
Start/Pause: Press Start/Pause to
begin cooking. Press again to pause
the cooking.
Note: While paused, the programmed
cooking settings will be saved until you
resume cooking. These can be cleared
by turning off the unit.
10 | nuwavenow.com
to turn the unit off and on. Turning the unit off will also cancel the
99:59 (99 hours and 59 minutes)
2:00 (2 hours)
CAUTION
Temp: Press Temp, then enter the
desired cooking temperature.
The default cooking temperature is
350°F. To change the temperature,
press Temp and select any temperature
between 50°F and 350°F with the
keypad.
Menu