NuWave PRO PLUS 2 Owner's Manual page 11

°F/°C Conversion:
1. Press Temp, "350F" and "Temp"
will be shown on the display.
2. Press and hold Temp for 4
seconds to switch to Celsius. The
unit will beep twice and "177C" will
be shown on the display.
3. Repeat to switch back to
Fahrenheit.
Note: When switching temperature
modes, the Oven will always display
the default temperature of 350°F or
177°C.
Note: Your selected temperature mode
will remain in place even if the unit is
powered off.
Time: Press Time, then enter the
desired cooking time in hours and
minutes.
Example:
Hour: Min Hour: Min
01:30
Press 1 Press 2
Press 3 Press 0
Press 0
This can be adjusted at any point.
When the time reaches 0, the Oven will
beep 3 times and "End" will be shown
on the display.
The default cooking time is 15 minutes.
Minutes/Seconds Conversion: If
you want to change the cooking time
to minutes and seconds, select your
desired time, then press and hold Time
for 4 seconds, until you hear 2 beeps.
Repeat to change back to hours and
minutes.
Note: Your selected time mode will
remain in place even if the unit is
powered off.
Hour: Min
00:20 00:05
Press 5
QUICK START
OPERATING BUTTONS
Menu: Press Menu, then make your
preset selection using the keypad.
Press Start/Pause to begin cooking.
There are 100 pre-programmed Menu
Presets. See Quick Start Guide and
Recipe Book for full list. Temperatures
and time can be adjusted after
selected.
Saving User Presets #101-150:
50 user presets can be saved. Create
your own saved recipe from scratch or
adjust one of the existing 100 Menu
Presets.
1. Set your desired cooking
temperature and time.
2. Press Menu twice. Will display 101.
3. Use the keypad to select the slot
number (#101-150) for your custom
recipe.
4. Press and hold Menu until "Save" is
shown on the display to save your
recipe.
Reheat: Press Reheat, the default
temperature and time are 350°F at 4
minutes, both of which can be adjusted
at anytime. Press Start/Pause to begin.
Delay: You can delay the start of your
programmed cooking function.
1. Set the cooking temperature and
time.
2. Press Delay, DLY will be shown
on the display. Enter the time you
want to delay cooking in hours and
minutes.
3. Press Start/Pause to begin the
delay process.
The delay time can be changed at any
time. Note: The temperature cannot
be changed while the delay function is
active.
nuwavenow.com | 11