Safety Requirements - Haier GE Vertical Zoneline AZ90E09D C Technical Service Manual

Table of Contents

GE Factory Service Employees are required to use safety glasses with side shields, safety gloves and

steel toe shoes for all repairs.

Steel Toed Work Boot

Cut Resistant Sleeve(s)

Brazing Glasses

Prior to disassembly of the GE Vertical Zoneline to access

components, GE Factory Service technicians are REQUIRED to

Step 1

Plan and Prepare

Step 2

Shut down the appliance

Step 3

Isolate the appliance

Safety Requirements

Electrically Rated Glove and

Dyneema® Cut Resistant

Glove Keeper

Plano Type Safety Glasses

follow the Lockout / Tagout (LOTO) 6 Step Process:

– 5 –

Prescription Safety Glasses

Safety Glasses must be ANSI

Z87.1-2003 compliant

Step 4

Apply LOTO device and lock

Step 5

Control (discharge) stored

energy

Step 6

"Try It" verify that the appliance

is locked out

Dyneema®Cut Resistant

Glove

Table of Contents