Related Manuals for jcb 15C-1
Summary of Contents for jcb 15C-1
- Page 1 OPERATOR'S MANUAL COMPACT EXCAVATOR 15C-1, 16C-1, 18Z-1, 19C-1, 19C-1 PC EN - 9831/2900 ISSUE 4 - 03/2018 THIS MANUAL SHOULD ALWAYS STAY WITH THE MACHINE...
- Page 2 Operator's Manual. You must understand and follow the instructions in the Operator's Manual. If you do not understand anything, ask your employer or JCB dealer to explain it. OPERATOR'S Do not operate the machine without an Operator's...
- Page 3 Notes: 9831/2900-4 Find manuals at https://best-manuals.com...
-
Page 4: Table Of Contents
Table of Contents Contents Page No. Acronyms Glossary ............................Introduction About this Manual Model and Serial Number ........................1 Using the Manual ..........................1 Left-Hand Side, Right-Hand Side ......................1 Cab/Canopy ............................1 Cross References ..........................2 Location of Manual ..........................2 Safety Safety - Yours and Others ........................ - Page 5 Table of Contents Operation Introduction General ..............................29 Operating Safety General ..............................30 Worksite Safety ........................... 32 Risk Assessment ..........................33 Walk-Around Inspection General ..............................35 Entering and Leaving the Operator Station General ..............................36 Emergency Exit ........................... 41 Doors Operator Door .............................
- Page 6 Table of Contents Getting the Machine Moving General ..............................74 Slopes General ..............................75 Driving on Slopes ..........................75 Working on Slopes ..........................75 Driving the Machine General ..............................76 Operating Levers/Pedals General ..............................77 Control Layouts ........................... 77 Excavator End Controls ........................77 Dozer Blade Controls .........................
- Page 7 Put into Storage ..........................134 During Storage ..........................134 Take out of Storage .......................... 135 Security General .............................. 136 JCB Plantguard ..........................136 Construction Equipment Security and Registration Scheme (CESAR) ..........136 Maintenance Introduction General .............................. 137 Owner/Operator Support ........................137 Service/Maintenance Agreements ....................
- Page 8 Table of Contents Maintenance Positions General .............................. 148 Maintenance Position (Excavator End Lowered) ................148 Service Points General .............................. 149 Access Apertures General .............................. 151 Engine Compartment Cover ......................151 Hydraulic Compartment Cover ......................157 Tools General .............................. 158 Toolbox .............................. 158 Lubrication General ..............................
- Page 9 Table of Contents Hydraulic System General ............................. 183 Services ............................185 Oil ..............................185 Cylinders / Rams ..........................186 Electrical System General ............................. 187 Battery ............................... 188 Battery Isolator ..........................189 Fuses ..............................189 Relays ............................... 190 Window Washer ..........................191 Miscellaneous Fire Extinguisher ..........................
-
Page 10: Acronyms Glossary
Table of Contents Acronyms Glossary Controller Area Network CESAR Construction Equipment Security and Registration Engine Control Module Electronic Control Unit ESOS Engine Shut-Off Solenoid FOGS Falling Object Guard System FOPS Falling Object Protective Structure HBCV Hose Burst Check Valve Hydraulic Tool Carrier HVAC Heating Ventilation Air Conditioning International Organization for Standardization... - Page 11 Notes: viii 9831/2900-4 viii...
-
Page 12: Introduction
Particular attention must be given to all the safety aspects of operating and maintaining the machine. If there is anything you are not sure about, ask your JCB dealer or employer. Do not guess, you or others could be killed or seriously injured. -
Page 13: Cross References
Location of Manual For: 18Z-1 [T3] ........................... Page 2 For: 15C-1 [T3], 16C-1 [T3], 19C-1 PC [T3], 19C-1 [T3] ............Page 2 (For: 18Z-1 [T3]) Operator's manual located in a vinyl document pouch in the toolbox compartment behind the operators seat. -
Page 14: Safety
If you do not fully understand the warning messages, ask your employer or JCB dealer to explain them. Safety is not just a matter of responding to the warnings. All the time you are working on or with the machine you must be thinking of what hazards there might be and how to avoid them. -
Page 15: General Safety
Lightning can kill you. Do not use the machine if there is lightning in your area. Machine Modifications This machine is manufactured in compliance with prevailing legislative requirements. It must not be altered in any way which could affect or invalidate its compliance. For advice consult your JCB dealer. 9831/2900-4... -
Page 16: Clothing And Personal Protective Equipment (Ppe)
Introduction Safety Clothing and Personal Protective Equipment (PPE) Do not wear loose clothing or jewellery that can get caught on controls or moving parts. Wear protective clothing and personal safety equipment issued or called for by the job conditions, local regulations or as specified by your employer. - Page 17 Notes: 9831/2900-4...
-
Page 18: About The Product
Product Compliance Your JCB product was designed to comply with the laws and regulations applicable at the time of its manufacture for the market in which it was first sold. In many markets, laws and regulations exist that require the owner to maintain the product at a level of compliance relevant to the product when first produced. -
Page 19: Description
For more information, contact your JCB dealer. Optional Equipment and Attachments A wide range of optional attachments are available to increase the versatility of your machine. Only the JCB approved attachments are recommended for use with your machine. Contact your JCB dealer for the full list of approved attachments available. -
Page 20: Main Component Locations
About the Product Description Before you do a maintenance task, make the product safe. Main Component Locations Figure 3. A Cab/canopy (contains the operator station) B Boom (part of the excavator arm) C Dipper (part of the excavator arm) D Bucket E Dozer blade F Undercarriage G Upper structure... -
Page 21: Product And Component Identification
Table 1. Explanation of the PIN Digit Description 1 to 3 World manufacturer identification. For example, JCB = UK Build. 4 to 8 Machine type and model. Random check Letter. The check letter is used to verify the authenticity of a machine's PIN. -
Page 22: Operator Protective Structure
About the Product Product and Component Identification Figure 5. Perkins TYPE CODE A Engine data label The data label includes the engine identification number. The engine identification number has 15 digits and must be read from left to right. For example, GN82691U969759B. Table 2. - Page 23 If the machine is used in any application where there is a risk of falling objects then a FOPS (Falling Object Protective Structure) must be installed. For further information, contact your JCB dealer. The FOPS has a data plate attached. The data plate indicates what level of protection the structure provides.
- Page 24 About the Product Product and Component Identification Figure 8. 19C-1 (Cab) A FOPS guard stage 1 B FOPS stage 1 work lights Machine fitted with canopy, FOPS guard is integrated into canopy roof plate. Figure 9. 18Z-1, and 19C-1 (Canopy) Level I FOPS guard only available with these machine.
-
Page 25: Safety Labels
Keep all of the safety labels clean and readable. Replace a lost or damaged safety label. Make sure the replacement parts include the safety labels where necessary. Each safety label has a part number printed on it, use this number to order a new safety label from your JCB dealer. Safety Label Identification For: 18Z-1 [T3] ......................... - Page 26 About the Product Safety Labels (For: 18Z-1 [T3]) Figure 10. 817/7006-2 332/V3761-1 332/T9356-2 817/70112 817/70018 817/700106-2 817/7004 9831/2900-4...
- Page 27 About the Product Safety Labels Figure 11. 817/70112 817/7004 817/70005 817/700106-2 Table 3. Safety Labels Item Part No. Description Qty. 817/70012 Run over hazard. Start the engine from the operator's seat only. Do not short across the terminals. 817/70023 Entanglement hazard. Do not touch. 817/70004 Warning.
- Page 28 About the Product Safety Labels Item Part No. Description Qty. 817/70018 Warning. Crushing of whole body. Do not operate the controls from outside of the machine. 332/F0279 Stability hazard. Ensure the load is within the capability of the machine. Read the Operator’s Manual. 817/70014 Warning.
- Page 29 About the Product Safety Labels (For: 15C-1 [T3], 16C-1 [T3], 19C-1 PC [T3], 19C-1 [T3]) Figure 12. 817/7006-2 332/V3761-1 332/T9356-2 817/70112 817/70018 817/700106-2 817/7004 9831/2900-4...
- Page 30 About the Product Safety Labels Figure 13. 817/70112 817/7004 817/70005 817/700106-2 Table 4. Safety Labels Item Part No. Description Qty. 817/70012 Run over hazard. Start the engine from the operator's seat only. Do not short across the terminals. 817/70023 Entanglement hazard. Do not touch. 817/70004 Warning.
- Page 31 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...