Table of Contents
Advertisement
loW Voltage WIrIng to Inlet ValVes
ConneCtIng the sWItCh Input
your power unit may have one of several types of Switch Input for connection to the low voltage wiring. the
purpose of the Switch Input is the same in all cases - to connect the low voltage wiring to the power unit.
fIttIng the fIlter Bag (Bagged models)
your power unit (bagged type) is compatible with iCentral and Valet max-Flo™ white bags and iCentral and Valet
Universal Blue vacuum bags. Installation of both bag types is identical.
1. expand the bag's pleats by hand. 2. Fit the bag's rubber cuff seal over the bag adaptor 3. the vacuum bags are
suitable for both Compact and Full height power unit canisters.
Bag adapteR (inlet stem)
fits inside the bag opening
Bottom BaFFle
Fits at the bottom of the
canister with the legs
iCentral Central Vacuum Systems
to the power Unit
Switch Input
power Units fitted with
the Smart Control
Board.
Connect the low
voltage wiring to the
Switch Input using the
mini plug-in terminal
block provided.
facing down.
loop the low voltage wire from one inlet valve to the next.
expand the bag
first
8
InStallatIon Manual
to additional inlets
Some power Units
have a pair of spring-
loaded terminals for
the Switch Input.
other types may
have push-on spade
terminals.
the bag may be folded at the
bottom in compact power units.
lInt FIlteR
lift the Bottom Baffle and clear any
fluff or lint from the metal gauze filter
each time you change the bag.
Advertisement
Table of Contents
