Vacuum Hoses & Cleaning Tools - Ness Valet iCentral WP V3.1 Installation & Operation Manual

Table of Contents

Advertisement

VaCuum hoses
Standard Hose. plug in
to the inlet valve to turn
on the power unit.
available in 9m, 10m &
12m lengths.
also available:
Hose extenders in 3m, 5m & 6m.
Quick Care Stretch Hose extends to 9m and collapses down to a
convenient 3m.
9m Speed Control Hose with on/off and variable speed slider
switch for use with compatible power units.
a variety of vacuum hoses are available including,
standard hose, switched hose, speed control hose,
wireless switched hose and high voltage hose.
generally these are interchangeable, although it is
always best to decide which hose is to be used in
advance of the installation process.
Importantly, the standard hose length of 9 metres is a
good manageable size, however, if absolutely necessary,
longer hoses and hose extensions are available.
CleanIng tools & aCCessorIes
a wide variety of floor tools and brushes are available
from your iCentral dealer or installer.
you will need at least a hose, a telescopic wand and a
floor tool (the Combination tool being the most versatile
and popular choice).
iCentral Central Vacuum Systems
Switch Hose with the
convenience of an on/off
switch on the handle.
available in 9m, 10.5m & 12m
lengths.
speCIal applICatIons
There will be many special applications that may require
greater knowledge, expertise or assistance. It is not
recommended that you attempt difficult installations
without seeking advice or assistance which is readily
available.
For example, homes with flat roofs and slab floors may
require external ducting, or ducting that may be best
trenched around the home.
Similarly, double brick or concrete constructions will
require greater planning and often may involve the
builder. this guide is not intended to address those type
of installations or applications.
13
InStallatIon Manual

Advertisement

Table of Contents
loading

Related Products for Ness Valet iCentral WP V3.1

Table of Contents