Table of Contents
Advertisement
Inlet ValVes
Inlet valves are available in a variety of models for
different applications.
Standard Series valves are the most common and will fit
most existing wall valve openings. the iStyle designer
series offers a choice of attractive colours and finishes
to complement any decor.
Standard Series inlet valves in
white, Ivory or Black.
Utility Valve
for an extra
iStyle designer series inlet
point in the
valves in a variety of colours.
garage.
the valves are generally available with either a "pin jack"
arrangement, where, on inserting the hose, the pins are
shorted and the Vac is switched on (Standard Series and
iStyle), or will have a micro switch in the valve which is
activated by the hose cuff (Utility valve).
most wall valves are internationally compatible with most
hoses although there may be exceptions.
For best fit and ease of installation please use the
recommended back plate for wall valves.
wall valves are usually mounted on internal walls
and generally at the same height as power points for
consistency, however you can choose your own height
if needed. you can also consider installing a power point
next to the valve if you are planning to use a high voltage
hose and turbo style cleaning head.
iCentral Central Vacuum Systems
wall valve
installation
11
In some cases, you may need to mount the wall Valve
on the floor, particularly in homes that are already built
and access to the wall space is difficult.
take time and pay attention to finding the best location
for the wall valves so that they cover the greatest area
of cleaning, reducing the need to move the hose too
often from valve to valve. a standard hose is 9 metres
and is a good manageable size, however, if absolutely
necessary, longer hoses are available.
glue
the pVC glue is actually a solvent which melts the pipe
and fitting together. There are different qualities of glue
and different glues dependant on the application.
In australia, you should use the Blue pVC glue. green
(which has greater strength) may be used if Blue is not
available. do not use Clear glue which is made for non
pressure applications.
ensure that the ducting and fittings are free of dirt, grime
and burrs. always wipe both surfaces with a clean cloth
and if there is excess grime or foreign matter you should
clean the areas with a pink pVC primer before applying
the glue.
only apply the glue to the ducting, as glue applied to
the inside of a fitting may be pushed ahead and create
a rough bead which will reduce airflow and may cause
a blockage. the ducting should be inserted all the way
into the fitting and turned a quarter of a turn to distribute
the glue evenly.
InStallatIon Manual
Floor valve
installation
• Clean surfaces before gluing.
• Apply glue to pipe not fittings.
Advertisement
Table of Contents
