Table of Contents
Advertisement
4.
Insert the PMC-GPIB into the slot as shown in Figure 4. It might be a tight fit, but do not
force the board into place.
1
1
Host Face Plate
2
3.3 V Keying Hole
5.
Use the mounting hardware provided to fasten the PMC-GPIB to the host.
6.
Reinstall the host, if you removed it to install the PMC-GPIB.
7.
Power on your system.
The PMC-GPIB hardware installation is now complete.
Figure 4. Installing the PMC-GPIB
3
5 V Keying Hole
4
PMC-GPIB Board
GPIB Hardware Installation Guide and Specifications | © National Instruments | 9
3
4
2
5
5
Mounting Screws
Advertisement
Table of Contents
