Table of Contents
Advertisement
In the United States (per FCC 47 CFR), Class A equipment is intended for use
Note
in commercial, light-industrial, and heavy-industrial locations. In Europe, Canada,
Australia and New Zealand (per CISPR 11) Class A equipment is intended for use
only in heavy-industrial locations.
Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical
Note
equipment that does not intentionally generate radio frequency energy for the
treatment of material or inspection/analysis purposes.
For EMC declarations and certifications, and additional information, refer to
Note
the
Product Certifications and Declarations
CE Compliance
This product meets the essential requirements of applicable European Directives as follows:
•
2014/35/EU; Low-Voltage Directive (safety)
•
2014/30/EU; Electromagnetic Compatibility Directive (EMC)
Product Certifications and Declarations
Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance
information. To obtain product certifications and the DoC for this product, visit
, search by model number or product line, and click the appropriate link in the
certification
Certification column.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the Minimize Our Environmental Impact web
page at
ni.com/environment
directives with which NI complies, as well as other environmental information not included in
this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
disposed of according to local laws and regulations. For more information about how
to recycle NI products in your region, visit
(RoHS)
environment/rohs_china
go to
ni.com/environment/rohs_china
GPIB Hardware Installation Guide and Specifications | © National Instruments | 33
. This page contains the environmental regulations and
At the end of the product life cycle, all NI products must be
National Instruments
National Instruments
(For information about China RoHS compliance,
section.
ni.com/environment/weee
RoHS
.)
ni.com/
.
ni.com/
Advertisement
Table of Contents
