13 BRAKE SYSTEM
106
–
Remove cotter pin
linings.
–
Clean the brake caliper and the brake caliper bracket.
E00351-10
–
Check that spring plate
sliding plate
rectly.
E00352-10
–
Insert the new brake linings, insert the pin, and mount the cot-
ter pins.
Info
Always change the brake linings in pairs.
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
E00353-01
–
Correct brake fluid level to marking
Brake fluid DOT 4 / DOT 5.1 (
–
Mount screw cap
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
K01347-10
3
4
, pull out pin
, and remove the brake
5
in the brake caliper and brake pad
6
in the brake caliper bracket are seated cor-
A
.
p. 156)
1
2
with membrane
and O-ring.