Using The Footswitch For More Presets - Crate VTX212 User Manual

Using the Footswitch for More Presets:

The Crate three-button footswitch supplied with the VTX65 allows access to an addi-
tional DSP preset for each channel of the amplifier. When the footswitch is connected to
the amplifier as shown below, the "original" DSP presets are active for each channel
when the #3 footswitch LED is illuminated. These are referred to as "DSP Bank 'A'."
When the #3 button is switched and the LED is out, a second DSP preset may be stored
and recalled for each channel - "DSP Bank 'B'."
NOTE: DSP Bank "B" presets are only accessible when the footswitch is connected to the amplifier. When
the footswitch is not connected, only DSP Bank "A" is accessable.
VTX212
Three-Channel Guitar Amplifier with Advanced DSP
For home or office use
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: this device may not cause harmful
interference, and this device must accept any harmful interference
received, including interference that may cause undesired operation.
EXTENSION
SPEAKER DSP
BANK A
BANK B
"LEFT" jack
Switch #1:
LED on = SOLO CH. LED on = SOLO/
LED off = RHTYHM CH.
LED off = CLEAN
Only when Switch #2
is activated (LED lit)!
#3031613
FOOTSWITCH
INSERT
CHANNEL
CLEAN
SOLO/RHYTHM
"RIGHT" jack
Switch #2: Switch #3:
LED on = DSP
RHYTHM CH. BANK "A"
LED off = DSP
CH. BANK "B"
9