VTX30 Congratulations and thank you for choosing the Crate VTX30 Guitar Amplifier with Digital Signal Processing. This rugged amplifier features a Clean channel with a three-band EQ and level control, and a Solo channel with our patented FlexWave technology, Gain, Level and Shape control. An easy to operate DSP section lets you dial in a variety of digital effects including reverbs, delays, octave and wah-wahs.
VTX30 The Top Panel: SOLO INPUT GAIN SHAPE LEVEL SOLO CLEAN 1: INPUT: Use this 1/4” jack to connect your guitar to the amplifier by means of a shield- ed instrument cable. SOLO CHANNEL: A high gain channel giving you sounds from a slight edge to serious overdrive.
VTX30 14: POWER: Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of the switch depressed). The switch illuminates when the amplifier is turned on. 15: TUNER: The electronic tuner is active whenever the amplifier is turned on, providing constant, “real-time”...
VTX30 The DSP Section: Use the DSP control to select one of the 16 built-in digital effects. Use the DSP Level control to adjust the amount of selected effect. In the fully counter clockwise position there will be no effect applied. As you rotate the Level control clockwise the amount of effect increases.
VTX30 System Block Diagram: TUNER A BC D EF G BUFFER INPUT MODE Two-Channel Guitar Amplifier with DSP CLEAN LEVEL MID HIGH SOLO GAIN SHAPE LEVEL POWER LEVEL INPUT FOOTSWITCH JACK SOLO/ CLEAN SPEAKER EXTENSION SPEAKER...
Power Requirements Size and Weight The VTX30 is covered with a durable Tolex material: wipe it clean with a lint-free cloth. Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish. Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice.
Need help?
Do you have a question about the VTX30 and is the answer not in the manual?
Questions and answers