Grizzly ERV 1400-35 ZV Translation Of The Original Instructions For Use page 52

GB
• Before each use, carry out a
visual inspection of the power
and extension cables for signs
of damage or ageing.
• If the power cable for this equip-
ment is damaged, it must be
replaced by the manufacturer,
a customer service agent of the
same or a similarly qualified per-
son in order to prevent hazards.
• Keep the power cable well
away from the cutting tools.
Should the power cable be-
come damaged during work,
then instantly disconnect the
power cable from the mains.
DO NOT touch the power
cable before it has been dis-
connected from the mains.
• Keep the extension cables
away from the teeth. The teeth
may damage the cables and
result in contact with live parts.
• Check that the mains voltage
is the same as indicated on the
rating plate.
• Wherever possible connect the
implement to a power socket
with a residual-current circuit
breaker that has a rated cur-
rent of not more than 30 mA.
• Avoid body contact with
earthed parts (e.g. metal fenc-
es, metal posts).
• Only use approved extension
cables of the type H05VV-F
or H05RN-F with a maximum
length of 75 m and which have
been approved for open-air
use. The stranded cord diame-
ter of the extension cable must
be at least 2.5 mm
unreel a cable drum to its full
length so that the entire cable
52
. Always
2
can be checked for damage.
• Use the envisaged cable sus-
pension when attaching an ex-
tension cable.
• Never pull the cable to discon-
nect the plug from the socket.
Protect the cable from heat, oil
and sharp edges.
• If the connecting cable is dam-
aged, first disconnect the ex-
tension cable from the socket.
You can then disconnect the
connecting cable of the equip-
ment.
• If the power cable for this equip-
ment is damaged, it must be
replaced by the manufacturer,
a customer service agent of the
same or a similarly qualified per-
son in order to prevent hazards.